It's a Ford Focus 04 plate
Remove the door panel and use your voltmeter to see if it's getting power and ground. If it is, then you need a new regulator.
Replace window regulator Ricks Free Auto Repair Advice
SOURCE: groaning noise on my peugeot 306 passenger door/ cl unlock n locking thing
open the door pull the rubber boot back that houses the wiring loom you will find that there are a number of wires broken if doable solder them back to gether and insulation tap them up, you should find this solves your problem.
your noise should and your windows should work if there are to many wires brocken you can get a new loom from the dealer
good luck
this is a very common problem i do 2 ore 3 of these a day
SOURCE: Power window failure on drivers side
Sometrimes the wires between the door and the body break from opening and closing the door, check your window motor for paower with a test light, if no power, you have a broken wire, between the door and body
SOURCE: The heated seats don't heat, both driver and passenger side.
your heater element in the seat went bad,the dealer will have to do this because the seat has come apart the cover wether it is leather or cloth.
SOURCE: How do I know if my drivers side power window is grounded properl
Hi there,
Try replacing the button that you push up and down. It could be bad under it and not making the connection. Maybe take the panel off and take the switch off, then clean the connecters under the button. Maybe that will do it. Also, you probably already ckeched this, but is the window off track? Well, good luck and let me know. Have a great night.~MWD
90 views
Usually answered in minutes!
What should the resistance be in a Ford focus window switch drivers side
×