SOURCE: a/c mount broke
You can buy an A/C bypass pulley from an O'reilly auto or anyone that supplies Dorman parts. the pulleys are cheap and allow you to mount things and use the stock serp belt. You will have no AC ,though. The kit is designed with the intent of eliminaing the compressor, which is very expensive to replace.
SOURCE: A/C Compressor & Serpentine Belt
some parts stores offer a bypass pulley and belt kit. check local parts house. good luck . also you can get a junk yard compressor. that dont work but does turn and be riding again.
SOURCE: need to bypass ac compressor on a1997 chevy lumina 3.1l
I doubt anyone knows that off the top of their head. You could run a string through the path you want the belt to take and measure how much string it takes. This will give you an approximate length for the belt -- most parts stores could find one close to that size.
SOURCE: My AC compressor went out on my 2004 Chevy Blazer.
its the same. but a different pulley takes place of the a/c compressor. I know DORMAN makes a few "bypass pulleys" to do this, but dont know if they make one for your truck. at the worst... you will need to get a pulley and bracket from the dealer for a truck without a/c . as long as your a/c pulley bearing is ok, you can let the belt run there.
SOURCE: I need a Diagram on
The compressor cannot be by-passed, but you can disconnect the compressor clutch by disconnecting the two wire connector at the compressor; then the compressor pulley is just an idler.
75 views
Usually answered in minutes!
×