Need Manuel to reset emerson thermostat P150

SOURCE: fuel pump not running

Fuel Pump suse location #14 20Amp Relay box located on left side in engine compartment the location is marked on the fuse box, fuel pump relay is #1 on the same box if the relay has electrical power then go to the pump located inside the fuel tank.

SOURCE: don''t have code to reset radio after my battery was taken out

I had the same problem with my 2002 CR-V after replacing the alternator. If you open the glove compartment there is a sticker (at least it was on mine) on the left side of the glove compartment door. The top number is the code. The bottom number is the serial number of the stereo.

SOURCE: how do i reset the tir sensor

you have put your vehicle in learn mode. there is a special tool to relearn tire positons. take vehicle to a dealership and have tire pressures corrected and tire pressure sensors relearned. your tire pressure info. is on your drives door, 07 tahoe should be at 30psi .you can try pushing check and wait for honk, then let air out of left front tire until you hear a honk, then right front, then right rear, then left rear. by then your sensors will be learned but you will have four flat tires, it'll be easier to have someone reprogram using tool.

SOURCE: want to reset my number pad

Lincoln put the code on the hinge of the truck driver side. It should be taped on so be careful not to rip it.

SOURCE: I have a 2000 S430

Reset "Service" indicator for 2000 Mercedes-Benz S430

1. Switch ignition "ON".
2. Repeatedly press button [B] until both the total and trip mileages appear in the odometer display of the speedomoter.

This dashboard type:


Or this dashboard type:

3. Repeatedly press button [C] until the "service" symbol and "distance remaining to the next service" appear in the odometer display.
4. Press button [A] for 3 seconds until the message "DO YOU WANT TO RESET THE SERVICE INTERVAL? CONFIRM BY PRESSING THE R BUTTON" appears in the odometer display.
5. Release button [A].
6. Within 5 seconds press button [A] until the service interval appears in the odometer display.
7. Release button [A].
8. Switch ignition "OFF".