How to get the phone setting off - 2000 Lincoln Navigator

Question edited for clarity and correct order.

https://www.google.com/search?q=1996+Opel+Astra+Estate+1600i.+Torque+settings+on+mains+and+big+ends

..

Turn iPhone Bluetooth On:First you want to make sure that Bluetooth is functioning on your iPhone. Click on the Settings icon from the iPhone desktop. From the settings screen click General to show the iPhone General Settings as displayed in the below image. Notice you can see if Bluetooth is on or off from this screen. General Settings screen you can click on Bluetooth to configure the Bluetooth settings. On the Bluetooth screen shown below click to the left of Off to turn Bluetooth On.

1. Begin Uconnect Setup:Now that Bluetooth is operational on the iPhone you can start the Uconnect process. Click the Uconnect button on the rear view mirror to begin. The voice from the Uconnect system will ask you to verbally select one of the options from the menu. Once Uconnect asks for your input say "Setup" to begin the process of syncing the iPhone.
2. Start Phone Pairing:Once you say setup in the above step the Uconnect system will list numerous options available from the setup menu. One of these options is "Phone Pairing" so when the Uconnect system asks for the choices from the setup menu say "Phone Pairing".
3. Pair a Phone:In the Phone Pairing menu you can modify current entries or begin pairing a new phone. After Uconnect lists all of the choices you should say "Pair a Phone" to begin the process of pairing the iPhone.
4. Uconnect Pin Code:The first step in pairing a phone is setting the Bluetooth Pin Code that authorizes that phone to pair with the Uconnect system. When asked for the Pin Code say any four digit combination such as "1 - 2 - 3 - 4". Uconnect will repeat back the Pin Code so you can verify it has recorded properly.
5. Connect iPhone To Uconnect:After you have set the Pin Code for the Uconnect system you need to view the iPhone's Bluetooth Settings screen which you can get to following the steps in Step 1 above. Before the Uconnect system shows up in Bluetooth the Bluetooth Settings screen will look similar to the below where you may have other Bluetooth devices showing or not.After a couple seconds the Uconnect system will display as "Hands Free" as shown in the below image. Notice it states that it is not yet paired,,,,,
6. Click on the Hands Free device showing in the Bluetooth devices list above. This will open a new screen as shown in the below image that prompts you for the Pin Code you specified in Step 5.
   
   Enter the Pin Code and then click the Connect button in the top right corner of the above window. This will pair the iPhone with Uconnect and take you back to the Bluetooth devices screen where the Uconnect Hands Free device will now show Connected as shown in the below image.
   
   After the device is connected you will be prompted by the Uconnect voice again so proceed to the below steps.
7. Phone Name & Priority: After connecting the iPhone you will then name the phone and set a priority between one and seven. Name the phone anything you would like and if this is your primary phone set the priority to one so this phone always connects at a higher priority than any other phone.
8. Verify & Test:Now have a friend dial your cell phone while you are in your car to see if the music volume lowers and the Uconnect voice tells you there is an incoming call from a certain number. To make calls you can press the Uconnect button and follow the voice prompts.
The Uconnect system is a great way to safely use your cell phone in the car.

In order to connect your tracfone with the 2016 Honda CR-V via Bluetooth, then just follow the list of directions as given below,
1.Press and hold DISP to go to the Settings screen.
2.Select Phone Settings.
3.Select Bluetooth Device List (if no phone has been paired) or Connect Phone (if pairing an additional phone).
4.Select Add Bluetooth Device.
5.Make sure your phone is in discovery mode and select OK.
6.HFL searches for your phone. Select your phone when it appears on the list.
If your phone does not appear: Select Phone Not Found and search for HandsFreeLink from your phone.
7.HFL gives you a six-digit code. Compare it to the code that appears on your phone. Connect to HFL from your phone.
8.The system asks if you want to enable Phone Synchronization. Select On to automatically import contacts and call history

For more clarification, here I have attached the video with my answer which will help you out to Set Up Bluetooth connection between your headset and tracfone in 2016 Honda CRV, take a look

When you try to pair your phone to the car via Bluetooth are you allowing the car to see it by enabling the phone visibility setting.
To do this go into the phones setting find the blue tooth setting then select visibility this allows the car to see it for about 1 minute 59 seconds then go to the cars settings on the dash cluster to pair the phone it should now find it.

If you have a Bluetooth u-connect radio and Bluetooth phone it is likely the settings of the phone and car radio are to pair. I expert that during the pairing process and hands free operation the radio sets itself to mute.

Check settings!

Hope this helps?

Try searching from the car bluetooth but make sure that your phone is set to "discoverable"

Please specify your phone make or model

I've had nothing BUT trouble with LG and bluetooth.
Never again.
Your answer is YES it is a compatibility issue

You need to make your phone "discoverable" to your bluetooth. Go to settings menu on phone , then wireless and networks. Click on bluetooth settings and click " discoverable mode". The car will never find your phone if your phone is not discoverable. Hope it helps.

Look for a setting that changes the ring from vibrate to ring. It's a setting different from that of ring volume.