SOURCE: BRAKE WARNING LIGHT
I dunno if this will work on your BMW, but on my BMW Z3 and M3, it was....
Turn the ignition key to position 2, but do NOT start the car. Wait for
about 45 seconds and the brake warning message will be reset.
If it doesn't reset, then the brake sensor was damage. You will need to replace the brake sensor. It sounds like you replace the brake right after you saw the warning, so the brake sensor should be okay.
SOURCE: BMW 5 series - 2005 model - resetting service & waring lights
this needs to be done with a european capable scan tool,check around to see if someone has this tool, no other way sorry
SOURCE: ABS & Brake warning lights turn on
it is possible but its also possible you have a wheel speed sensor acting up. you would have to have it scanned for codes
SOURCE: I had the brake pad light come on so I changed the
when changing the brake pads you also need to replace the pad sensor that runs into the left caliper in the front. Or the right caliper in the rear.
297 views
Usually answered in minutes!
×