SOURCE: Valve cover gasket
valve cover gaskets are in expensive, like 20 bucks, a books that can tell you how to do it would be 25-50 and you will be able to use the book for other things.. there are usually a few long bolts going straight through your valve cover, jus take them off remove the old gasket and put new one in put them back in.. however tightening the valve cover bolts will be the only tricky part.. you may need a torque wrench and have to refer to the book to know exatly how tight they should be.. but as a rule of thumb 80-90 ft-lb of tork is usually used.. be careful when doing this cuz if you put the wrong torque on it will bend your valve covers or posibbly not seal correctly
68 views
Usually answered in minutes!
×