Question about 1999 Chrysler Concorde

Open Question

How can i re adjust the shifter interlock cable for a 1999 chrysler concorde lxi 3.2 engine

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 2 Answers

SOURCE: HOW DO I GET TO THE BATTERY IN MY 1999 CONCORDE LXI

The batery is located in the right side finder. You have to pull the wheel and you will see the cover for it toward the front of the car behind the head lite. its not fun. Good luck

Posted on Dec 18, 2008

Ad
motor1258

Mike Butler

  • 6674 Answers

SOURCE: heater stopped working in a 1999 chrysler concorde lxi

Check all fuses first

Posted on Jan 16, 2009

Dan C

  • 93 Answers

SOURCE: Location of engine oil drain plug on 1999 Chrysler Concorde - 3.2L engine

It isn't immediately obvious to find, as the head is smaller than you probably are used to. Make sure you aren't looking at the wrong pan. It's not so hard to get turned around when you're upside down and think you are looking at the engine pan when you are looking at the trans pan.
Take another look and you'll find it.

Posted on Apr 16, 2009

chryslerguy

  • 323 Answers

SOURCE: Chrysler Concorde LXI 4 door - 2004 The car starts up and seconds after, the RPM drops and the car shuts off. The code P0513 comes up on the computer.

That is a code for an invalid skim key. If you have another skim key try it. If it does the same thing then the skim module may be bad.

Posted on May 07, 2009

Ron A Martinson

  • 381 Answers

SOURCE: I have a 1999 chrysler concord and the shift cable

Cable is shot. Change the shift cable (cable from shifter to transmission) Also spray some WD40 on the shift linkage on the trans and work it back and forth to loosen it up before you put the new cable on. Good luck

Posted on Mar 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 chrysler 300M won't shift out of park. Pulled so ******* the shifter it broke.


possible internal locking pawl stuck fault or adjustment required

ADJUSTMENTS
sourced from another forum

The park interlock cable is part of the brake/shift lever interlock system. Correct cable adjustment is important to proper interlock operation. The gear shift and park lock cables must both be correctly adjusted in order to shift out of PARK.

ADJUSTMENT PROCEDURE

1. Remove floor console as necessary for access to the park lock cable.

2. Shift the transmission into the PARK position.

3. Turn ignition switch to LOCK position. Be sure ignition key cylinder is in the LOCK position. Cable will not adjust correctly in any other position.
NOTE: If the key will not turn to the LOCK position, pull up on the cable lock button and manually move the cable in and out until the key can be turned to the LOCK position.

4. Pull cable lock button up to release cable, if necessary.

5. Remove and discard the cable adjuster lock pin, if a new cable is being installed.

6. Ensure that the cable is free to self-adjust by pushing cable rearward and releasing.

7. Push lock button down until it snaps in place. The lock should be 1-2mm below the surface of the cylindrical portion of the cable



d5fad53b-454e-40de-8326-5998ee796fd6.jpg2010-09-06_193640_8-yevmkukx3b2zymzwvvrzuy4i-4-2.gif

Jan 16, 2017 | 1999 Chrysler 300M

1 Answer

LXI. How do I open the hood?


Chrysler Concord Repair Work.MOV - YouTube

? 8:42
www.youtube.com/watch?v=PL-hN8BkJlI
Nov 3, 2011 - Uploaded by mccrackenphillip
As I Said Here Is Ponchos 2000 Chrysler Concord It Need AHood Latch And Batt Repair. He Hit ... How To Install ReplaceBroken Hood Release Cable and Handle ... 98 to 2004 Chrysler Concorde Factory remote Transmitter ...

Sep 11, 2015 | 2004 Chrysler Concorde

1 Answer

Cant find the drain plug on the oil pan for my 1999 chrysler concorde lxi


The oil drain plug is located on the side of the oil pan, passenger side. It does not look like a typical drain plug, as it's one of those quick drain type. It is meant to be hand loosened and tightened. DO NOT OVER TIGHTEN or you are in for a world of hurt. Just firmly finger tight

Sep 04, 2012 | 1999 Chrysler Concorde

1 Answer

I HAVE A 1999 CHRYSLER CONCORDE LXI, CHECK ENGINE LIGHT COMES ON AND RPM RACE TO 4000 WHEN DRIVING 55MPH?


First thing is to have the computer scanned for trouble codes.
My guess would be a torque converter or overdrive problem.

Jun 26, 2012 | 1999 Chrysler Concorde

1 Answer

Do I have to use the special orange coolant?


no any eythelene glycol antifreeze will do ,concentrated is best ,as for colour --- optional

Nov 21, 2009 | 1999 Chrysler Concorde

1 Answer

I have a 1999 chrysler concord and the shift cable stuck while in gear, I cannot move the shifter up or down what is the problemwith the cable?


Cable is shot. Change the shift cable (cable from shifter to transmission) Also spray some WD40 on the shift linkage on the trans and work it back and forth to loosen it up before you put the new cable on. Good luck

Apr 21, 2009 | 1999 Chrysler Concorde

1 Answer

Mt 1999 concorde lxi shuts down and after 1 to 4 seconds restarts


it sounds like your computer wont take your key. best thing you can do is take the car to the dealer.

Dec 19, 2008 | 1999 Chrysler Concorde

Not finding what you are looking for?
1999 Chrysler Concorde Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...