Cars & Trucks Logo

Related Topics:

Anonymous Posted on Feb 11, 2018

2012 BMW 328i coupe idoling rough and stutters when I accelerate

Getting codes p1006 and p1014

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Jan 12, 2009

SOURCE: loss of power when accelerating

the problem was caused by a loose ignition wire
Carl

Ad

Anonymous

  • 112 Answers
  • Posted on Nov 14, 2009

SOURCE: 2000 bmw 321i stalls and lacks power when accelerating

it may be your fuel pump not working properly also check your fuel pump relay

Anonymous

  • 1 Answer
  • Posted on Sep 10, 2010

SOURCE: 1997 bmw 328i conv.

radio does not work on my 1997 bmw 328 it gives the message
"phone" a mechanic pulled it out of its slot and reset the code...it worked for two days and again it doesnt work with same message

Anonymous

  • 63 Answers
  • Posted on Oct 13, 2010

SOURCE: 1983 Cadillac 4.1 L stutters on acceleration, read

It could be the wires going to the map sensor are shorting out, you should check them. Hope this helps.

Rdecode

  • 157 Answers
  • Posted on Sep 25, 2011

SOURCE: I replaced a battery in my 97 328i BMW the radio needs a code

This radio can be decoded via radio serial, no need to apply to dealers and supply car VIN numbers and proove ownership, no chip EEPROM readings...

You can order Alpine BMW radio codes online here, codes are calculated from radio serial numbers

https://www.carstereocode.com/unlock.php?mk=6

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2007 BMW 328i coupe Has cog with exclamation mark light on and a whining sound

The illuminated COG on the dashboard is the Transmission Fault Warning Light. The sound you're hearing is probably the transmission locked in "get home" mode or "limp" mode. If you're going to attempt to repair yourself you'll need to start with a quality BMW specific scan tool to see what the system says is causing the fault, then trouble shoot from there. I've used a Schwaben Elite scanner on several of my bimmers with great success.

https://www.ecstuning.com/b-schwaben-by-foxwell-parts/professional-bmw-mini-scan-tool/014020sch01a~scf/
0helpful
1answer

I have a 1999 BMW 328i E46 Engine that loss of power then codes P1542 and P0120e. I m trying to find the pedal position sensor is that on the throttle body?

The pedal position sensor is placed by the acceleration pedal under the dashboard if it is left hand driven where your left foot accelerates and if it is right hand driven where your right foot accelerates.
0helpful
1answer

BMW whine noises 70mph

Hello Robert Anderson,

I always ask the color when my friends are describing their car... and immediately ask the interior color too...
It helps me imagine their following sumptuous description...
Twin-turbos, 8 speed automatic, Walnut grain...
fuzzy DICE... Plastic idols affixed to the dash (etc.)...
all helps in the visualizations

but... for your car I imagine a noise.

Okay... a 70 mph whine usually means the rear end differential gears have gotten out of alignment.

It could mean a few other things... but that is the biggie!

Hope this helps!

2012 BMW 328I 3 0L L6 Drive Shaft Flex Joint RockAuto

http://www.rockauto.com/en/catalog/bmw,2009,m5,5.0l+v10,1443173,drivetrain,differential+pinion+bearing,2264

BMW F02 F01 750LI REAR DRIVE AXLE GEAR SUSPENSION DIFFERENTIAL DIFF 3 46...
0helpful
1answer

I got a p0597 code on my 2012 bmw 328i

That is a code for the electronically controlled engine thermostat. Have checked asap before you do very expensive damage to your engine.
1helpful
1answer

My 2007 bmw 328i coupe is flashing codes p143e and p143 and p0491 what do they mean?

Ok the p143 or 143e code is 02 censors ! Located on the exhaust pipe . And on BMW Is got to cost some $$$$.the p0491 Is the air intake control censer! Should be located somewhere next to the air cleaner. Hope this helps and good luck !!

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jeff_24365d731679262d

0helpful
1answer

CODE DESCRIPTION FOR 2011 BMW 328I SRS SYSTEM 9419H/37913

You can not clear codes or have them stay away,
until you diagnose the system fault, and make the
required repairs

No idea what those codes are
Never seen ones like that

SRS Codes are in Enhanced Data on a professional
scan tool,you can not get them from global generic
code reader
0helpful
1answer

What helps with noisy engine lifters on 2008 bmw 328i coupe?

You will have to do a valve clearance set, a mechanic will know how to do this, hope this helps
0helpful
1answer

2011 bmw 328i

If the temperature control is on cool....sounds like you have other problems with AC. ( compressor not working, needs R134,) Check under the hood for a box that has fuses in it, their are also relays in it. Look for the relay marked AC.
0helpful
1answer

My engine light on my 1996 328i just went on and it started running rough. What shold I ck

take it to a parts store they will scan it for free the code can lead you to the problem
Not finding what you are looking for?

189 views

Ask a Question

Usually answered in minutes!

Top BMW Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

old marine
old marine

Level 3 Expert

2426 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...