Question about Isuzu Rodeo

Open Question

Where do I find the transfer case actuator please

2007 rodeo Denver 3ltr. Stuck in 2wd wont select 4wd hi or low

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
autodr

autodr

  • 260 Answers

SOURCE: intermittent 4wd on 98 jimmy

the module is what i would suspect. and i do believe it is in the r kick panel. i've seen the button pack on dash go bad too, but module is best bet.

Posted on Nov 16, 2008

Ad

gasitjr

  • 90 Answers

SOURCE: 1998 z71 push button 4wd will not work

Some of these must be reprogrammed.Double check the connections, look for bent pins, with a terminal tool or small pick CAREFULLY bend female connectors tighter to ensure good contact with male pins. The use of a good scanner could help pinpoint the trouble.

Posted on Feb 04, 2009

Anonymous

  • 4 Answers

SOURCE: my 2000 blazer won,t select 4wd hi/low or auto

there is a vacuum solonoid on the firewall in the middle with 2 vac lines and a 2 wire plug
thats ur problem
push the button and smack it with the handle of a screwdriver should work

Posted on Feb 07, 2009

Anonymous

  • 400 Answers

SOURCE: S-10 Blazer 4wd problem

www.amazon.com/Chiltons-Repair-Manual.../0801981425


Hope this helps you

Posted on Jul 12, 2009

thomasnee

  • 677 Answers

SOURCE: hi I have a 96 jeep cherokee country with a

the 242 is the correct transfer case for your car.Its the selec-trac transfer box.The other type is the command-trac.Both types were used in Cherokees.Hope this helps

Posted on Jan 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 ford ranger - Where is the 4x4 actuator located


On the transfer case
Transfer Case - Electronic Shift
The four-wheel drive electronic shift-on-the-fly feature electrically shifts the vehicle transfer case between 2WD, 4WD HIGH, and 4WD LOW. The system mode is selected by the operator through the mode select switch (MSS) on the instrument panel. The operator is informed which mode the system is in by two instrument cluster indicators: one for 4WD HIGH which appears as 4WD, and one for 4WD LOW, which appears as 4WD LOW. Shifts into 4WD HIGH can be made at any speed. When shifting into 4WD HIGH with the vehicle stationary, tooth blockage may occur preventing shift completion. When the vehicle is driven above 8 km/h (5 mph) the shift will complete. When shifting in or out of 4WD LOW, the four-wheel drive (4WD) control module requires that the vehicle speed be less than 5 km/h (3 mph), the brake pedal be applied, and the transmission be in NEUTRAL (automatic transmission) or the clutch pedal be depressed (manual transmission).
The gearmotor encoder assembly is mounted externally on the transfer case. It drives a rotary cam which moves the mode fork and range fork within the transfer case between the 4WD HIGH, 4WD LOW, and 2WD range positions.
The four-wheel drive (4WD) control module controls the gearmotor encoder assembly that shifts between 4WD HIGH, 4WD LOW, and 2WD modes.

Mar 17, 2017 | Ford Cars & Trucks

1 Answer

What issues would make the front differential not shift from 4wd hi to 2wd.


ratio changes of from 4wd to 2wd are performed in the transfer case and not the diff
so if the front appears not to be changing from high to low check the problem in the transfer case selector or actuator

Mar 09, 2017 | Cars & Trucks

1 Answer

Why can't I reset my check 4wd light on dash or move out of 2wd at all after replacing transfer case? Also motor cuts out and electronic throttle now won't open when won't start


Search Results

    GM 4WD Warning Light Issues - RepairPal

    repairpal.com > Car Care Advice > References
    Is your 4WD warning light on or a "Service 4WD System" message displayed? ...attempting to shift from 2WD high to 4WD low while the vehicle is moving), all the mode ... Resetting the TCCM may only be a temporary repair. ... The Bulb Check ...The mode switch on the dash will send a signal to the transfer case control ...

    How To Override Stuck 4WD On A GMC Vehicle, Transfer ...

    ? 10:55
    https://www.youtube.com/watch?v=qNQOt_JP78U
    Dec 29, 2014 - Uploaded by JamieJones TheCarMan
    How To Override Stuck 4WD On A GMC Vehicle, Transfer CaseControl ... My 07 GMC Yukon is stuck in 4 wheel drive low, can I do this same process on it? .... has been changed, the module was reset, and the actuator were all replaced. ... is being slughish when i start off from red light or stop sign but after ...

Jan 18, 2016 | Cars & Trucks

1 Answer

2007 gmc 1500 4wd not working. service light on and lights on switches are off. truck in 4 low


Sounds as if the transfer case control module has gone bad and grounded the circuit to the 4 low actuator. The module is located behind the headlight switch in the dash. You could try tapping the actuator on the transfer case lightly with a hammer to see if it releases.

Feb 23, 2015 | 2007 GMC Sierra 1500

1 Answer

My 4wd select switch stuck 4 wd will switch into low but will not go into auto or 2wd


didn specify vehicle but problem can be checked on most first look under vehicle at transer case sometimes actuator wiring damaged or disconnected ---actuator can be stuck ot sticking and wont fully move back and forth[lube or repai actuator rod]---lastly 4wd module gone bad most are up under dash or are part of selector switch

Apr 02, 2013 | Cars & Trucks

1 Answer

1999 Chevy Suburban stuck in 4wd


Hi Dale, Sometimes the front diff becomes wound up. I am not saying this is the problem with your vehicle but what I'm about to suggest may work as it often does with other four by fours. Make sure you have a clear space to drive the vehicle backwards and forwards at a slow speed. As you do so select the two high position on the selector. You may need to reverse and go forward several times. Hope it works for you. Regards John

Aug 21, 2012 | 1999 Chevrolet Suburban

1 Answer

4wd wont switch out of 4 hi if it does goes to


Most likely the actuator motor on the transfer case or the switches in the dash,very rarely have I replaced the module under the dash!!
The switches cost around $65.00 and the actuator runs around $400.00 at the dealer for parts,Nether are a hard or complected job!
Hope this helps,Have a Nice Day!

PS From my experience it's probly the actuator motor.

Mar 10, 2010 | 1999 Chevrolet Silverado 1500

2 Answers

Manual Transmission seems to be stuck in low range. Transfer case in 2wd high range, however when transmission is shifted to 5th gear still only going 25 mph at 4000pm. Clutch seems to be engaging and...


The transfer case is stuck in the low range. If manual shift try shifting from low to high several times to see if free up. If electronic, check all fuses and make sure you hear transfer case change range. Do this by shifting with key on engine off. If no change refer to qualified transmission mechanic.

Dec 25, 2009 | 1990 Ford F250

4 Answers

It's a holden rodeo turbo/diesel 2005.check 4wd light on


A mere 2,400km into the life of my 07 Rodeo TD 4WD, I used 4L for about 2km of medium-steep/slippery track. After stopping and selecting 2WD the 'Check 4WD' light appeared, meaning I was stuck in 2WD for the rest of that trip. Luckily I was able to complete the trip in 2WD without incident.

The dealer blamed me for 'not following the instructions in the manual' (utter codswallop), 'fixed' it, and very reluctantly gave me a scribbled set of instructions on resetting the system, which I've included below.

When I suggested that these instructions should be included in the manual, the response was 'not necessary if owners use the system correctly'. More cods.

Here's how to reset it:

1. Ignition off, hold all 3 buttons (2H, 4H & 4L) in together

2. Switch ignition on to 'reds' position (last position before start)

3. Hold in this state for 30 seconds

Hope this may be of use !!

Mar 28, 2009 | 2004 Isuzu Rodeo

3 Answers

2001 jimmy stuck in 4wd low


Usually when a truck gets stuck in 4 low you need to put it in reverse, start backing up very slowly, put it in neutral (or push in the clutch on manual trans models) and stop the truck with the brakes. this will release the load on the gearing which should allow you to shift out of 4 low.

Feb 15, 2009 | 2000 GMC Jimmy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

459 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...