SOURCE: manually close to operate liftgate on dodge caravan 2012 rt
There is a sensor in the tailgate that is malfunctioning or the wiring to it is defective. I assume this is still under warranty correct.
Testimonial: "thankss buddy"
SOURCE: How do I replace the driver side fender on my 2012 dodge journey?
remove fender you have to raise vechicle remove wheel. remove splash shield remove bolts holding fender through wheel opening.then you have open hood remove headlight housing remove fender bolts behind head light housing.
SOURCE: how to adjust headlights of a 2009 Dodge Journey
thay were installed incorectly remove the bulbs and make sure there seated properly in the head lamp then recheck to see if there in alignment if not there should be adjuster screws on the lamp one for horizontal and one for vertical
SOURCE: My dashboard show the slipery sign andABS also my
There is a problem with the ABS system. This is the reason for the ABS, Slippery sign and the cruise not working. Have the codes read. Probably a wheel sensor issue. I don't know about the blue tooth.
SOURCE: Why dose my 2012 Dodge charger RT ABS light stay on
I have this problem all the time , and its because im a sloppy auto tech, when I replace my front brake pads and sometimes I need to disassemble the rotor in order to take the pads and brake fluid out , when reassembling I always forget to put back the abs sensor correctly , its a wire connected to a toggle sensor that goes on the rotors teeth to measures 1's and 0's or on's and off's, make sure this is properly installed and positioned or you will have this problem and more, like your abs system will not work when you need it to work, unskilled and sloppy mech like me do this all the time , good luck
575 views
Usually answered in minutes!
×