Acura RDX headlight assembly. How to remove it to change a headlight on the passenger side

SOURCE: How do I remove my front headlight assembly.

My head light is broken and I need to replace the whole assmbly. How do I do this?

SOURCE: I cannot move the passenger side headlight out to change the bulb

I had this happen to me. It does come out just like the owners manual says but what it doesn't tell you is how hard it is for the assembly to come out. I thought I was going to brake it before it popped out, but I was so mad I didn't care anymore. I had dirt and grime binding in the assembly. Once I had it out I cleaned it up and it went back into place with out any problems.

SOURCE: replace passenger side low beam bulb in a 2003 lincoln aviator

Open hood and remove the radiator site shield and the air delector on top of the headlamp assembly. You will then see 2 clips that you will pull up and then remove the headlamp assembly.

SOURCE: how to replace passenger side headlight assembly on 2001 BMW 325i

The E46 2001 325i headlight assembly is held down by 4 bolts. Question is where they are and how to get to them. The 4 bolts require a 10mm wrench.

There are two bolts on top of the headlight assembly. And two more near the back of the assembly, near the area where you would change a headlight bulb.

There is just one more trick to this. Please refer to this trim: http://e46fanatics.com/howto/howtodetail.php?howto_id=24

This trim hooks on to the side fender, just under the turn signal. You have to unhook this.

Then the entire headlight assembly (including the turn signal) can be slided out together.

SOURCE: How to remove the headlight assembly on an Acura

There will be screws in front and one or two pointing down on assembly.
You can go to autozone.com and register for full free online repair manual for your acura. It has diagrams and step by step directions on everything. Plus much much more