Question about Honda Accord

Open Question

123-01 code vsa solenoid valve malfunction 2008 honda accord

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: 2007 Honda Accord. Check engine and VSA light suddenly came on.

MY ENGINE MANAGEMENT LIGHT HAS COME ON AND VSA LIGHT ACCELARATER NOT WORKING

Posted on Oct 16, 2009

Ad

Anonymous

  • 21 Answers

SOURCE: My Honda Element 2008 has a VSA Warning light and

It may be as simple as your oil condition or oil level. If you have poor oil in your engine the VTEC system will not operate properly and when RPMs reach 2800 or so it will buck. If everything checks okay with the oil have the code checked for your check engine light/VSA light.

Posted on Oct 26, 2009

yup it broke

  • 105 Answers

SOURCE: 2008 honda accord replace rear brakes

no, 12mm wrench or ratchet on 12mm socket. the piston is tough to push back in. its a twist in type and you will need some force to push and twist the piston back in. - note rear brake pads wearing out on the new 08-09 accords are very common and if under 16-18 thousand miles it may be covered. honda knows about this problem

Posted on Oct 27, 2009

Geoff Walton

  • 819 Answers

SOURCE: how to remove starter solenoid from 1998 honda accord LX 4cyl?

the starter solenoid is integral to the starter.

Posted on Dec 26, 2009

usarmywrecke

  • 2 Answers

SOURCE: 2008 honda accord stereo code error 4

I just changed the battery in my 08 accord same thing there is a code on the left side of glove box.type that code in using the preset numbers it will be on white sticker

Posted on Aug 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

09 honda accord check engine light and vsa light on change fuel pump spark plugs coil packs still still saying cylinder misfire


unless you pay attention to injector problem replacing plugs will not fix the fault
run the fault codes to find out why the VSA light is on and get the codes for the misfire

Dec 09, 2017 | Honda Cars & Trucks

2 Answers

I have Honda Accord 2001and I put the scanner this Code come out p1768 what this means


Possible causes
- Clutch Pressure Control Solenoid Valve harness is open or shorted
- Clutch Pressure Control Solenoid Valve circuit poor electrical connection
- Faulty Clutch Pressure Control Solenoid Valve

Has to do with the solenoid or wiring to the solenoid inside the transmission. You should have the problem addressed at a transmission shop.

Feb 11, 2015 | Honda Cars & Trucks

1 Answer

How to fix the automatic transaxle malfunction


Possible causes of OBD code P0780
- Low transmission fluid level - Dirty transmission fluid - Faulty shifting solenoid valve - Shifting solenoid valve harness or connectors - Shifting solenoid valve circuit is open or shorted The Error code is generally activated on detection of the following conditions: The P0780 codes is detected when no rotation change occurs between input (turbine revolution sensor) and output (revolution sensor) and shifting time is long or when shifting ends immediately or when engine revs up unusually during shifting.So check out these points and see if any are all help keep me posted

Sep 20, 2014 | 2002 Honda Accord

1 Answer

What does VSA warning light mean


Vehicle Stability Assist you need to get the codes read to isolate the problem with this system

Sep 03, 2014 | 2008 Honda Accord 2.2i-CTDi

3 Answers

My 2008 Honda accord is displaying an explanation point on dash what does it mean


If the explanation point is inside of what looks like a tire. Tire Pressure Monitor System. Inflate your tires to the correct pressure (probably 32psi) Or could be an issue with you TPMS

Jul 28, 2014 | Cars & Trucks

1 Answer

My 98 honda accord has the check engin light on n it reads p0740 wat can i do


DTC P0740 - Torque Converter Clutch Circuit Malfunction


2_23_2012_5_15_10_pm.jpg


It sounds like you need new solenoids in valve body you have a open circuit in the T/C clutch solenoid valve in valve body, I would replace the solenoids to fix your problem and inspect all connection to transmission valve body.

The valve body will need to be removed to get the valves replaced This can be a little hard if you have not done this before it comes with harness and solenoid pack together.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 23, 2012 | 1998 Honda Accord

2 Answers

I also got code u0122 on honda accord 09 showing abs,vsa,and brake light need help please!


code u0122 fcan malfunction ecu to vsa. dealership has to fix.problem in your ecm and vechicle stability assist.

Nov 08, 2011 | 2009 Honda Accord

1 Answer

How do i repair the vsa unit on a 2006 honda accord?


I found this online. replacing the EGR valve would be a good thing to check as a VSA repair would be really expensive, it doesn't make sense that these should go bad, and it does not seem like it is something you can do yourself.
answers.yahoo.com/question/index?qid=2009040118264G
'This is going to sound funny, but your problem is not with the VSA. Here's what the dealer is missing in their diagnosis.

the way the Vehicle Stability Assist system works is that when a loss of traction is sensed (when one wheel is spinning faster than the other) then the control for the VSA starts to cut out engine cylinders to reduce the power to the wheel until traction is restored. When the control unit enables the VSA the exclamation point icon comes on and it will stay on until the engine is turned off.

Now for the twist--when the engine has a misfire that causes the engine to lose power then the VSA system "thinks" power is being reduced to restore traction and it puts the exclamation point icon on. So in essence, the VSA is being fooled into thinking that the system is enabled when in reality the problem is one of a reduction of engine power.

I have seen this numerous times on the Accords and Pilots. Almost always the problem is with the EGR valve. That doesn't mean that it is in your case, but my experience is that it usually is. Couple that with the history of EGR valve problems on the Honda V-6 and the the odds are strong that's what your problem is. However, anything that could cause a loss of power or misfire in an engine, such as an ignition coil breaking down or bad fuel could cause this problem.

In most States the things that can cause this problem are covered under a 3 year 50000 mile emissions warranty. I'd ask the dealer to do the diagnosis for an engine misfire and see where that goes.'

Aug 30, 2011 | 2006 Honda Accord

1 Answer

My Honda Element 2008 has a VSA Warning light and


It may be as simple as your oil condition or oil level. If you have poor oil in your engine the VTEC system will not operate properly and when RPMs reach 2800 or so it will buck. If everything checks okay with the oil have the code checked for your check engine light/VSA light.

Oct 25, 2009 | 2008 Honda Element

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...