2002 frontier 4 door v6 fuel injection valve cover gasket replacement
SOURCE: how to replace valve cover gasket on a 2002 stratus 3.0 liter engine
i don't know that vehicle very well... but there are usually bolts/screws that hold them in place. 4 to 6 of them per cover. sometimes the spark plug holes have giant nuts that hold the cover in place.
SOURCE: 1997 Camry Valve Cover Gasket Replacement
Removal of the plenum is pretty straight forward. You will need to replace the plenum gasket after you remove it; the gasket is not reusable. Personally, if I was going to take the trouble to remove the plenum, I would replace the plugs and wires back there, also.
I know, I have a 93 Camry V6, and it is a real pain to do the plugs and wires with the plenum on. There are no secrets or great tips on the plenum removal, just take your time. Remember that there are different size bolts, and where they go. Please get back to me if you need any more info...Hope this helps, and thanks for choosing FixYa to resolve your issue.
The graciousness of a FixYa rating for my assistance would be greatly appreciated.
SOURCE: valve cover gasket leaking
When you buy the valve cover set, it will include the spark plug well "O" rings. Simply remove the valve cover and on the underside of the valve cover, you'll see the "O" rings that need replaced and you'll see exactly how the valve cover gasket itself fits.
SOURCE: replace valve cover gasket
I have the same problem on a 2003 Town & Country. The cover for the front 3 cylinders is quite straight forward, but in order to do the rear cylinders I believe you are going to have to remove the cowling below the windshield. You will need a gear puller to remover the windshield wipers first, then remove the cowling. Than should give you more room to work. It's still not going to be easy, but it sure beats paying hundreds of $$$$ in labor charges.
47 views
Usually answered in minutes!
×