I lubricated the chain after I heard squeeks. I sprayed Tri Flo on the chain. I opened and closed the garage door to work in the lubing. The next morning, I pushed the button and the light flickered on and off as normal, but the garage door did not move. I had this happen several years ago, and after several days, it started working again. I forgot about this, otherwise I would not have lubed the chain. Does anybody know what the problem is???
Sounds like you got oil on an electrical part. Inspect all & clean oil from parts that don't need it.
SOURCE: can't program the homelink system
Have you remembered to push the little button on the head of the garage door. most of the new ones use a rolling code and you have to push the button and make it flash, then you just hold your button on you home link, it blinks slow I think then blinks fast. and you are done.
SOURCE: homelink garage door opener will only work at very
UNPLUG EVERYTHING NEAR THE GARAGE EXCEPT THE OPENER IF THAT HELPS PLUG THEM IN ONE AT A TIME UNTIL YOU FIND THE PROBLEM.
PROBABLY RF COMING FROM SOMETHING IN THE GARAGE, FREEZER, BATTERY CHARGER (IN AN RV OR MOTORCYCLE)
OR A LIGHT TRANSFORMER - EVEN ANOTHER DOOR OPENER CAN CAUSE PROBLEMS - YOU DIDN'T LIST THE BRAND OF OPENER, GENIE HAS REPLACEMENT RECIEVERS IF YOU HAVE MORE THAN ONE UNIT IN A GARAGE.
HOPE THIS HELPS
SOURCE: Homelink garage door opener
GOTO HOMELINK.COM
THEY MAKE THE SYSTEM AND HAVE INSTRUCTIONS YOU CAN DOWNLOAD.
ALSO GOOD GUIDE FOR TROUBLE SHOOTING.
HOPE THIS HELPS
SOURCE: 2006 GMC Envoy Denali, Universal Garage door
GOTO HOMELINK.COM TO DOWNLOAD INSTRUCTIONS FOR THIS SYSTEM
YOU WILL NEED TO RE PROGRAM THE UNIT WITH YOUR DOOR OPENER.
HOPE THIS HELPS
360 views
Usually answered in minutes!
Hi Wayne,Thanks for checking! About 2 weeks ago, I sprayed some CRC Electric cleaner in the morning toward where I thought the oil could have dropped in the engine. That afternoon, it was working again. About a week ago, since the squeak was still annoying, I sprayed some Tri Flow right at the latch area figuring it was far from the motor. It stopped the squeak, but the next day the opener stopped again, and CRC spray is not doing anything.
×