Cars & Trucks Logo

Related Topics:

Waixing Tang Posted on Apr 10, 2018

How many foot pound torque for rocker arm on 2000 accord 2.3L engine?

5 Related Answers

Anonymous

  • 27 Answers
  • Posted on Jun 18, 2008

SOURCE: Rocker Arms

17-23 Ft/Lbs.

Ad

Anonymous

  • 173 Answers
  • Posted on Nov 24, 2009

SOURCE: what is the torque of the rocker arms on alero 2003 3400 engine

14 ft/lbs first pass on all then an additional 30 degrees for all on final pass ..by the way 1 bolt flat to the next bolt flat is 60 degrees so all nuts get half a bolt flat final torque if ya wanna throw caution to the wind torque it to 16 ft lbs and be done with it. lol these specs are from gm ok. good luck and ps the intake pushrods are shorter than the exhaust pushrods and there is no clearance if you get them in wrong an apprentice found this out 3 years ago and a lot of people saw what happens lol..good luck

Anonymous

  • 10319 Answers
  • Posted on Mar 04, 2010

SOURCE: torque specs for the rocker arms of a 1997 malibu

31 foot pounds

Mike

  • 4383 Answers
  • Posted on Jul 26, 2010

SOURCE: Rocker Arm Torque specs for 2000 ford expedition

Ford has had non adjustable rockers. the rocker arms just get tightened down.

Anonymous

  • 1 Answer
  • Posted on Nov 05, 2010

SOURCE: Need torque settings for rocker arms

7.416666667 ft lbs or 89 inch lbs

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
1helpful
1answer

What are the torque specs for rocker arms in a 2000 impala 3.4l v6

The 2000 Chevy Impala 3.4 liter engine rocker arm bolt torque specification is 45 pounds. The rocker arm bolts should be torqued in 15 pound intervals.
0helpful
1answer

2003 buick rendezvous rocker arm torque spec

14 N.m (124 lb. in.) plus 30° This what the book says. But 10 foot pounds plus 30 degrees.
0helpful
1answer

Torque pressure on the values on a 2003 ford torus

Rocker arm torque is 42 inch pounds. Not foot pounds.
1helpful
2answers

What are the torque specs for bolt on rocker arm in 2.7liter chrysler sebring engine

About 42 inch pounds... Inch, not foot. 42 foot pounds will strip the threads. 3 and 1/2 foot pounds.
0helpful
1answer

Torque specs for rocker arms

The 12mm head bolts torque to 15 ftlbs.
the 10mm head bolts torque to 9 ftlbs.
crosshatch pattern for the sequence.
0helpful
1answer

91 firebird 3.1

Thank you for your service. There is a webside 60 degree v6 dot com. Try a search there. They have all of the torque specs for the 3400 the rockers torque to 14 foot pounds on those but they are aluminum. Are the rockers currently installed and you want to tear engine down? Measure the current torque. If it breaks, install a helicoil
0helpful
1answer

On the 3.1L engine in the 1999 Chevy Malibu, I need to install the intake and exhaust rocker arm and push roods.

The exhaust push rods are the shorter of the two, the intakes of course are longer. The rocker arms should have been keep in order removed but they are the same for intake and exhaust valves. Torque to the rocker arms to 13 foot pounds.
0helpful
2answers

Where is the head gasket in a 1990 buick skylark and how do you knopw if its bad?

Gasket is between cylinder head and engine block. If u have oil in the coolant or vice versa, or overheating then u most likely have a bad head gasket
Not finding what you are looking for?

199 views

Ask a Question

Usually answered in minutes!

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...