Du a scan for codes and data. The button may b bad also
On most vehicles, the ETS button turns OFF the ETS. It is on by default, and if you see the low trac light illuminate, it means that one or more wheels are spinning - not getting traction. The ETS button gives you the option to turn off ETS when you feel you need to be in control of all drive wheels, whether they have traction or not.
SOURCE: Traction Control
the traction control is faulty in transmission or possible switch problem i have found in the past a stuck button from spilled soda
SOURCE: abs light, trac light, service engine soon light
The problem is probably the wheel hub bearings and it is more that likely the front. I had the same problem a few weeks on my 00 grand am gt. Connected the car to the tester it gave me a code for left front wheel bearing. I replace both wheel bearings because i figured what the hell they both have the same amount of miles on them. Taaadaaa no more lights!!! Hope this solves your problem.
SOURCE: abs light, trac light, service engine soon light 2001 Pontiac Grand Am
Sounds like you have a bad wheel speed sensor. You need to have it scanned. Since it's been sitting, it might just be a bad connection to one of the speed sensors.
SOURCE: ABS light and trac control light off
YOU NEED TO HAVE ABS CONTROLLER SCANNED FOR DIAGNOSTIC TROUBLE CODES..THE SYSTEM HAS DETECTED A FAULT..A GOOD SCAN WILL YOU LEAD DOWN THE PATH TO FIXING THE PROBLEM..YOU CAN SEE IF WHEEL SPEED SENSORS ARE NOT WORKING,IF YOU CAN'T COMMUNICATE WITH CONTROLLER,ETC..LET ME KNOW WHAT IS FOUND
1,066 views
Usually answered in minutes!
×