Question about 2004 Ford Freestar
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
If you go into the back of the cargo area and on the inside panel of the door there is a little square plug take it out and inside that panel there is wire pull on it and the door will pop open..
Posted on Sep 09, 2009
The easy part is you just need the latch for the liftgate. The hard part is getting to it and opening the liftgate to replace the latch. You should be able to pull the liftgate trim off most of the way with the gate closed and try to manually actuate the latch to open the gate. You may have to go so far as breaking the latch from the inside to open the gate and then replace your latch.
Posted on Dec 17, 2008
Replace the lock on the rear door. If a used lock is used it has to have the powered door. I am a car dealer and have replaced about 8-9 of them. I sell a lot of Town & Country vans. The 1st one I paid a Chrysler dealer to fix. About $200. After that I fix myself. About $70- $125 from a Chrysler dealer new with discount. The lock is not sending the correct code to the computer and the door is confused on what to do. Only 3 torx bolts to remove and the door panel 2 screws in handle then snap off.
On one I had that did not fix the problem and it was a relay sensor about $40. on the working arm / motor of the door and not the lock. Look at car-part.com for used parts. Thanks, Roy
Posted on Mar 02, 2009
SOURCE: power liftgate doesn't work
The power liftgate motor is located on the driver side panel directly behind the lift arm. First you will have to take the safety belt bolt out. After you get the plastic piece free from the body you will have to take the bolt out of the arm that connects to the hatch. Make sure you have a big enough torx bit for the bolt that holds the arm to the gate. This will allow you to slide the plastic piece off and out of your way. If you are having trouble getting the plastic piece to come off from around the liftgate arm, try putting the door down, that helped me. The rest should be easy. Hope this info helped you out.
Posted on Apr 14, 2009
Tips for a great answer:
Jun 28, 2018 | Saturn Cars & Trucks
Oct 12, 2012 | 2002 Chevrolet TrailBlazer
Sep 28, 2012 | 2004 Lincoln Navigator 4x4
May 14, 2011 | 2008 GMC Acadia
Oct 26, 2009 | 2004 Saturn VUE
Jul 16, 2009 | 2006 Ford Freestar
May 29, 2009 | 2001 Ford Escape
Nov 10, 2008 | 2003 Saturn VUE
Oct 20, 2008 | 2001 Ford Escape
149 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: