2007 nissan frontier 2.5 torque espec for the main bearing and rods

SOURCE: main and rod bearing torque specs

do you have a Haynes Manual or Chilton? if not check your local library, they may have one, the specs are in there

Steve Allison

• 5569 Answers
• Posted on Feb 20, 2010

SOURCE: need torque specs 1988 Chevy silverado for main bearings and rod

Those values and most everything else you need for DIY work are contained in the Haynes manual for your vehicle. We have one with each of our vehicles and not only give you the info needed to do repairs yourself but also get an idea of how much work a specific repair should (or shouldn't) cost.
'88 Chevy pickup manual
You can also buy these from auto parts stores for a few dollars less and sometimes on eBay for even less.

SOURCE: I have a v-6 2000 nissan xterra. What are the

Rod bearing torque

Step 1 - 10-12 ft.lbs
Step 2 - 60-65 Degrees more


Main bearing caps torque

66-74 ft. lbs

SOURCE: I am looking 4 the

mains - vertical bolts first 30 ft.lb. PLUS 90 degrees
pattern frt

8 7
4 3
2 1
6 5
10 9
side bolts 22 ft. lb plus 90 degrees
pattern frt

7 8
3 4
1 2
5 6
9 10

connecting rod caps cracked type rod-rod and caps must be kept in matched sets, recommend new bolts/nuts, spec is 32 ft lb. plus 105 degrees - torque each item to the correct torque then go back and do the degrees. these are torque to yield bolts and the procedure is very important.

SOURCE: bolt torque specifications for:1: headbolts 2: main bearings 3: Rod bearings

Make/model/year/engine of your car? Every one is different.;