SOURCE: 2005 Honda Odyssey brake light housing removal
Yes, there is a spear point style clip that is holding the assembly. Wrap a flat blade screwdriver with some masking tape (prevents paint scratches) and pry between the forward outboard corner of the brake light housing and the car body. You want to pry the assembly rearward.
SOURCE: how to change fog lights bulbs on my 2005 honda
To Install:
SOURCE: Honda Odyssey 2005 sliding doors won't open, beep 3 times
If you click once your remote control ,will open just driver side doors.To unlock all of them have to press twice , and then sliders.
SOURCE: 2000 Toyota Camry instrument panel gauges not working
check the fuses in your manual it will tell you which fuses are for the dash and replace them it sounds to me like they are blown! good luck
SOURCE: how to change plugs on honda odyssey 2005
you will need
8mm
10mm
5/8 spark plug socket
3/8 ratchet
3/8 extension (it could be 4in and longer)
and spark plugs factory plugs are pregap iridium
spark plug torque is 13.0 lb.ft
coil torque 8.7 lbf.ft
spark plug part # NGK 1zfr5k-11
# DENSO pkj16dr-m11
and spark plug anti seize on spark plug thread
what you need to do is remove the plastic cover 8mm socket or 10mm sockets
now remove the spark plug covers and remove the spark plug coils too 10mm head bolt you will need a 5/8 spark plug socket and a 3/8 ratchet and a 3/8's extension too
you need OEM spark plugs they work the best
hope this will help
The PCM also uses this information in order to manage the fuel system for maximum efficiency. The most obvious symptom you will see is the A/T gear position indicator lights will not come on or come on in the wrong position.
Once this is repaired emissions should pass
Lets get started. Place the key in the ignition and turn as if to start your minivan - but do not actually start your Odyssey.
206 views
Usually answered in minutes!
×