2004 dodge caravan 3.8 ltr Cranks just fine not running. p0129,p0300,p2305,p0032,p0129,p0300and p0032

SOURCE: 2005 dodge grand caravan 3.8L

Ouch! A case of the raucous rodent! I've been there...Not fun trying to track down and repair all the damage.

First of all, let me explain how the code sets: The computer monitors the PRIMARY side of the coil to determine the burn time on the SECONDARY side of the coil. This can be a little confusing. The code will set when the computer determines that secondary ionization (burn time) was too short, too long, or did not occur at all.
If you have confirmed that there is no spark at the spark plug wires, then that is why the code is setting...ionization is not occurring at all. What can be a little confusing is that this can be caused by a failure in the PRIMARY coil circuit even though the code is indicating that the computer is having a problem with the SECONDARY circuit. (The secondary circuit can malfunction even though the primary side is functioning perfectly, but if the primary side malfunctions, the secondary side ALSO malfunctions - it is impossible for the secondary side to work if the primary side is not working.)

So, I said all that to tell you this: I think you have pretty much eliminated the entire secondary side of the ignition by replacing the whole circuit. So the problem must be on the primary side. (Probably more chewed wires)
There are 4 wires going to your ignition coil. The BROWN/WHITE wire comes from the ASD RElay and supplies battery voltage to the coil assembly. Since the other four cylinders are firing, This wire has to be OK.
The code you are getting is for coil #2. This coil is controlled by computer through the DARK BLUE/TAN wire. If you disconnect your coil connector and probe this wire with a test light connected to the POSITIVE battery post, it should "blink" when to crank the engine over. My guess is that it will not be blinking. You can do this also on the BROWN/ORANGE (coil #1) wire and the DARK BLUE/DARK GREEN (coil #3) wire to see the difference.

Anyway, if the DARK BLUE/TAN wire does not blink, then the wire is broken (chewed?) between the coil and the PCM.

SOURCE: 2003 2.0l dodge neon

i would start by checking plug wires and spark plugs for proper gap replace if necessary check for compression in all cylinders i dont know what your codes are

toddgilbert

• 6360 Answers
• Posted on Mar 05, 2018

SOURCE: I own a 2005 Dodge Grand Caravan. Car won't Start. Last nights codes P2305 and P0522. Changed Ignition coil. New codes P0685 and P0688.

Best Manuals I suggest you try one of those instant download manuals. My nephew bought one for me when my car broke and we could fix it all by ourselves with the manual costing $10. This website reliable-store.com is very good for this.
?Try it.

Best Manuals

reliable-store.com

Best Manuals

reliable-store.com