Question about 1998 Pontiac Sunfire

Open Question

98 Pontiac Sunfire clutch pedal will not move. Cannot start or shift car without pedal down but it will not move at all

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: clutch

believe it or not, the floormat on my 2000 Sunfire will sometimes slip forward and hold the clutch pedal down against the floor. It truly feels like a mechanical problem, but simply pull the floormat away and the pedal pops right back up!

Posted on Jul 29, 2008

Ad

Anonymous

  • 3 Answers

SOURCE: I have a 98 Concorde

You need to check the linkage. Under the car, the section that connects the gear shift stick to the transmission rods.

Posted on Dec 01, 2008

Anonymous

  • 1 Answer

SOURCE: car will not drive, is it clutch or cabel

my daewoo lanos wont shift into gear/s while running even when clutch is depressed all the way

Posted on Jan 03, 2009

its420_us

  • 316 Answers

SOURCE: adding transmission fluid to 98 pontiac sunfire

There is a plug located on top of the transmission under the brake master cylinder. It is held in place by a bolt on the side of the transmission near the firewall. Remove the bolt, then remove the plug. Fill it until the fluid comes out of the hole.

Posted on Jun 17, 2009

bharj

  • 88 Answers

SOURCE: 98 pontiac sunfire starts then in a second shuts off

first of all lights on dashbord should come on no matter security or pass key deterant is in .better check "ignition switch".

Posted on Sep 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1998 Pontiac sunfire car wont shift out of nuetrel


Does the clutch pedal go to the floor? If not the clutch is not the problem and the transmission or transmission linkage is, inspect all components for loose or damaged components.

Jan 11, 2017 | Pontiac Cars & Trucks

1 Answer

2003 pontiac sunfire gear shifter is very loose


my sunfire is automatic, and the gear shifter is VERY LOOSE, doesnt catch in any of the drive options. just slides up & down, with no pressure

Jun 25, 2012 | 1999 Pontiac Sunfire

1 Answer

1996 pontiac sunfire manual transmission wont shift


Does the clutch pedal engage? This sounds like a clutch problem to me.

May 25, 2012 | 1996 Pontiac Sunfire

2 Answers

My 1995 Pontiac Sunfire is a standard. It won't start unless I hold the clutch pedal all the way down, hold the ignition key turned all the way on, and jiggle the gearshift for 2-3 minutes. It's like the...


Sound like you need a clutch switch, when they start to wear out, it will get to the point were even when you press the clutch there will be no crank at all. Should be and easy fix, just look up your clutch pedal, it will be at the very top.

Aug 11, 2010 | 1995 Pontiac Sunfire

2 Answers

My 2005 Pontiac Sunfire intermittantly grinds when shifting into first gear. This has been happening ever since I took the car in for its 60,000 mile tune-up early this year. I replaced my clutch three...


I believe the problem is the first gear synchronizer. They are what allows the gears to mesh together without grinding. As they wear, they are less able to mesh the gears together without grinding. The first gear gets used the most, so that one usually wears first. Each gear has them, so as time goes on, the others will wear. To replace the synchronizer/s, involves diaasembling the transmission. I would have the transaxle fluid level checked, maybe as simple as that. But usually it's the prior.

May 14, 2010 | 2004 Pontiac Sunfire

1 Answer

How do i check if it needs oil on the manual transmission because the shifts are hard to change when running or is there something else to do beside a new clutch already done


Hard shifting may be caused be the clutch not releasing properly.If you have a new clutch your problem might be caused by your hydraulic clutch release system.When stopped and idling you should be able to shift gears without grinding.Reverse grinding may indicate a clutch release problem.You should have some clutch pedal travel up from the floor before you feel it engaging.The oil fill check is either at the speedo or a plug at the axle shaft level.Be sure to use factory recommended fluid.Gear oil is not a proper fluid.

Oct 17, 2009 | 1997 Pontiac Sunfire

2 Answers

2002 Sunfire


check automatic adjuster on clutch pedal under dash .

May 08, 2009 | 1997 Pontiac Sunfire

1 Answer

Shifter stuck in second gear


Your shift linkage has come undone. Jack the car up and climb underneath. You shift linkage is either com undone from the trans or you shift stabelize bad has come undone at the shift arm.

Dec 11, 2008 | 1997 Pontiac Sunfire

2 Answers

Clutch


believe it or not, the floormat on my 2000 Sunfire will sometimes slip forward and hold the clutch pedal down against the floor. It truly feels like a mechanical problem, but simply pull the floormat away and the pedal pops right back up!

Jun 29, 2008 | 2004 Pontiac Sunfire

Not finding what you are looking for?
1998 Pontiac Sunfire Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...