SOURCE: need to bypass ac compressor on a1997 chevy lumina 3.1l
I doubt anyone knows that off the top of their head. You could run a string through the path you want the belt to take and measure how much string it takes. This will give you an approximate length for the belt -- most parts stores could find one close to that size.
SOURCE: My AC compressor went out on my 2004 Chevy Blazer.
its the same. but a different pulley takes place of the a/c compressor. I know DORMAN makes a few "bypass pulleys" to do this, but dont know if they make one for your truck. at the worst... you will need to get a pulley and bracket from the dealer for a truck without a/c . as long as your a/c pulley bearing is ok, you can let the belt run there.
SOURCE: I need instructions and a diagram to bypass the ac
simple trick provided you can do this by running some twine around your pulleys allowing for1-2 inches less for slack adjuster an that will pretty close.or they may have for that system without ac meaning the condenser unit.
SOURCE: How to reroute the belt on a chevy 2002
some cars dont need a bypass pulley just remove the ac compressor and get a belt for non ac some cars you cant do this because the belt routing is different with an idler pulley go to pepboys or autozone and ask them to print out the belt routing for both if they cant do it go to a gm dealer and ask hope this helps
85 views
Usually answered in minutes!
×