SOURCE: 2004 e500 mercedes trans problem code-2767 need
Hi,
The code P2767 definition is ,
Transmission input shaft speed sensor?turbine shaft (TSS)sensor B no signal..
Now in English it means the speed sensor is either faulty or bad connection,I would suspect the sensor, but worth getting checked by a transmission specialist,
Darren DCS
SOURCE: hard starting mercedes-benz w123
if it's trying to start and takes long time to start ,, first of all you have to think about the fuel filter and petrol pump.(replace both together)
SOURCE: 2003 mercedes e500 brake lining light in
If the brake wear light on you can't reset the light without replace brake pads and sensors inside the pads must replace both after replace it will off automatically
SOURCE: My gas gauge on my e500 Mercedes isn't working is
reset? no. check sending unit for faulty ground
SOURCE: How can I reset the Service Indicator on a Mercedes A160
To reste your srvice indicator you will need to follow the instructions below or follow this link to watch instruction video http://youtu.be/NTD9jmtsK2Y
1)Turn the key to position 2 in the ignition lock and immediately press button 000.0 twice within the space of one second.
2)Turn the key to position 0 in the ignition lock.
3)Press and hold button 000.0 Turn the key to position 2 in the ignition lock. Keep button 000.0 pressed.
4)Service message with current remaining distance or remaining time appears.
5)After about 10 seconds, an acoustic signal will sound and the service display with the new starting distance or starting time appears for about 10 seconds.
6)Release button 000.0
Your service indecator is now set.
This only applies to the W168 Mk1 and Mk1 Facelifted A-Class only, IE: A140, A160, A190 & A210 Petrol and the A160CDI, A170CDI diesel engines.
This will not work on a W169 model which is from late 2004 onwards.
Testimonial: "Thank you"
163 views
Usually answered in minutes!
×