Looking for location of iat sensor

All in the link

https://www.google.com/search?q=Chevy+Colorado+IAT+location

..

Your IAT sensor should be located in the intake snorkle between the air box and the throttle body.

IAT sensor ( Intake Air Temperature sensor) is in the air intake tubing by the air cleaner. It is about the size of a spark plug and has 2 or 3 wires plugging into it. Just look for wires going into rubber intake tubing and you found it. Hope this helps.

For its exact location on your vehicle,click the link below:----
Chevy Monte Carlo IAT Location http://technoanswers.blogspot.com/2012/11/chevy-monte-carlo-iat-location.html

--------
These will help.
Thanks.

LOOK ON AIR INTAKE DUCT.THATS WHERE IAT SENSOR LOCATED.

the sensor in air duct

The Intake Air Temperature (IAT) sensor determines the air temperature inside the intake manifold. Resistance changes in response to the ambient air temperature. The sensor has a negative temperature coefficient. As the temperature of the sensor rises the resistance across the sensor decreases. This provides a signal to the PCM indicating the temperature of the incoming air charge. This sensor helps the PCM to determine spark timing and air/fuel ratio. Information from this sensor is added to the pressure sensor information to calculate the air mass being sent to the cylinders. The IAT is a two wire sensor, a 5-volt reference signal is sent to the sensor and the signal return is based upon the change in the measured resistance due to temperature.



Fig. 1: The IAT sensor is located in the air cleaner outlet tube-2.2L engine and 2.4L engine

Hope helped.

most are located on the air duct between the air filter and throttle body

attached to air filter housing it is incorporated into the mass airflow sensor (maf)

The iat looks like the mass air flow its a hard plastic cylinder that connects to the intake tube after the air cleaner