SOURCE: changed plugs and wires on 1999 Buick le sabre
Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.
SOURCE: i do i get to
You must remove the engine "plenum cover", the "air vacumn chamber" (mounted on top of firewall--2 screws), the "coil packs" with the mounting bracket (just under the air chamber), and then you can access the rear plugs. Caution---you need to make up a long extension to use with your "plug socket". Make sure you fasten the socket to the extension by using "duck tape". If you separate the two pieces, with the socket down in the plug chamber---you will have a difficult time retrieving it. I have tuned my 1995 three times using the above method.
SOURCE: 1999 oldsmobile aurora code p 300
could be an intake manifold gasket leaking, or improperly gaped spark plugs
SOURCE: Oldsmobile Aurora 1998 Spark plug and wire change?
Hi Pete , i'm not sure if you are asking for confirmation or more advice , or are you posting a solution ?
Testimonial: "I wanted to post a solution. I've looked throughout the web and I have found nothing useful for this repair. This is typically a 600-900 dollar repair if one goes through the dealer. Parts are around 150$. Thanks"
?€¢
Crankshaft reluctor ring.
?€¢
Camshaft position sensor.
?€¢
Ignition control module.
?€¢
4 separate ignition coils.
?€¢
Eight spark plug wires and conduit.
?€¢
Eight spark plugs.
?€¢
Knock sensor.
?€¢
Powertrain Control Module (PCM).
Camshaft Position (CMP) Sensor
Right hand rear of the engine, near the power steering pump
359 views
Usually answered in minutes!
×