How does the alternator bracket go on
Remove
the accessory drive belt. Disconnect the negative battery cable.
Disconnect the generator electrical connector. Remove the engine
harness terminal from the generator: - Slide the boot back along the
cable.
- Remove the engine harness cable nut (3). - Remove the engine harness
terminal from the stud.
Remove the generator bolts and generator. Install the generator. Install
the generator bolts. Tighten the generator bolts to 50 N?m (37 lb ft).
Install the engine harness terminal to the generator: - Install the
engine harness terminal to the stud. - Install the engine harness
cable nut (3). Tighten
Tighten the engine harness cable nut to 13 N?m (10 lb ft). - Slide the
boot over the generator stud. Connect the generator electrical connector
(1). Connect the negative battery cable. Refer to Battery Negative
Cable Disconnect/Connect Procedure . Install the accessory drive belt
×