How to clean a washer bottle filter, how do you get to it, does the wheel need to come off. I have a mini cooper 2008. The mechanic said he had fixed it and de furred it but it still does not work.

Marvin

• 85242 Answers
• Posted on May 06, 2009

SOURCE: AirBag Light on- 2002 Mini Cooper

ALL AIRBAG PARTS ARE DEALER ONLY ITEMS, SO NO U ARE STUCK. IF I KNEW A CHEAPER WAY I WOULD 100%SHARE THAT WITH U, BUT WHAT IS THE PART YOU NEED EXACTLY?

SOURCE: Mini Cooper 2005. My front windscreen washers do

If you can hear the washer motor running when you operate it then the fault is most likely caused by a small filter for the washer pump inside the bottle that blocks up.
You will need to remove the washer bottle and clean out the filter.

SOURCE: Mini Cooper P1689 code

P1689 - No communication between ECM & Injection Pump Module. This is why it's a hard start and the peddle isn't acting like it should. There's a problem where the (Computer) ECM, isn't making contact with the Injection Pump module. So the computer doesn't know what the pump is doing or sending. Could be a cut in the wires, corrosion, etc.. So many things it could be, fuel pressure is low.

SOURCE: error code on 2008 mini cooper s of CCID 031 what

Hi. Error CCID 031 means increased emissions. You need to refer to yuor card dealer and have this ting replace. DTML - It is a little pump/sensor that measures fuel vapor emissions from fuel system. If your gas cap seal is faulty or you have any fuel system pressure leak this pump runs to maintain pressure in the system. Normally it is not supposed to run. When it runs it sets of the Check Engine light.

SOURCE: how to collapse rear calipers on mini cooper

Cooper rear caliper pistons MUST be rotated as they are pushed in. It is due to the parking brake being integrated into the caliper.