Doesn't have any relay's for the door locks . The (GEM) generic electronic module controls the door locks . Your best bet , take it to a qualified repair shop.
The Door Lock Function
When a door lock control switch is moved into the lock position or a door lock cylinder is rotated to the lock position, a ground is provided to the lock circuit input to the generic electronic module (GEM). The GEM then provides 12 volts to one side of the door lock actuators contained in the door latch assembly and simultaneously grounds the other side of the door lock actuators. This completes the door lock actuator circuit, causing the door lock actuators to rotate a cam assembly, which then locks the doors.
The Door Unlock Function
When a door lock control switch is moved into the unlock position, the door lock switch grounds the unlock circuit input to the GEM. The GEM then provides 12 volts to the opposite side (relative to locking the door) of the door lock actuator(s) contained in the door latch assembly and simultaneously grounds the other side of the door lock actuator(s). This completes the door lock actuator circuit, causing the door lock actuator(s) to rotate a cam assembly in the opposite direction, which then unlocks the door(s).
Generic Electronic Module (GEM) Diagnostic Trouble Code (DTC) Index
DTC
Description
Source
Action
B1300
Power Door Lock Circuit Failure
GEM
Go To Pinpoint Test D .
B1309
Power Door Lock Circuit Short to Ground
GEM
Go To Pinpoint Test D .
B1310
Power Door Unlock Circuit Failure
GEM
Go To Pinpoint Test D .
B1341
Power Door Unlock Circuit Short to Ground
GEM
Go To Pinpoint Test D .
Have a qualified technican diagnose the problem .
SOURCE: ford focus 54 door lock
The fuse for the door locks is in the back of the fuse block. The fuse block is held in with a couple of bolts. There is only one fuse back there.
SOURCE: how do i reprogram my02 ford focus remote locking key fob please.
get in your car close door hit the unlock button then put key in the ignition cycle the key from off to on (STOP BEFORE START POSITION) cycle key off to on 7 times after the 7th trime the doors should lock the unlock automatically that means u are in trainning mode hit the unlock button on key fob. the key fob should now work if it doesn't then try changing batt
SOURCE: Central Locking to Ford Focus LX 2001
Problem with 2001 1.6 Focus which i was going to purchase for the wife, but problem with central locking! key fob totally dead even when i tried the reprogramming trick (key in ignition press button several times) and when locking/unlocking manually, central locking only working intermittently! Please help regards steve
837 views
Usually answered in minutes!
×