SOURCE: 1990 Oldsmobile Ninety-Eight Regency Brougham
if you are not experienced mech. maybe you should take it to one
SOURCE: Need a diagram to replace the crank pulley on a
This is what I found on the 98 Regency instructions:
Crankshaft Damper
REMOVAL & INSTALLATION
DO NOT pry on the damper assembly to remove it from the vehicle or component damage will result. Remove the damper using a puller only.
Fig. 2: Removing the crankshaft damper bolt
Fig. 3: Do not attempt to pry on the damper to remove it from the crankshaft, use a puller only
Fig. 4: Removing the damper from the crankshaft
Fig. 5: When installing the damper, thread the bolt by hand first to prevent cross-threading
SOURCE: fan to cool motor not working. can't find a
check fuses and fan relays first.there should be a temp sensor around the thermostat housing where the upper radiator goes in should have two wires jump them two together and see if they come on
SOURCE: Where can I find routing diagram for a 1985 Oldsmobile Regency 98 3.8 v6 .
You could try your local library, they have access to most service manuals for cars, but you have to go there to get access to them. Or you could Google for any Oldsmobile owners clubs, someone there may have what you're looking for.
156 views
Usually answered in minutes!
×