SOURCE: Mercedes Benz C180 Fault Message Brake Assist.Visit Workshop BAS
Hi there
BAS is the Brake Assist System and if there is a malfunction it would
only come into play in an Emergency stop while applying full pressure.
BAS applies full braking force because people tend to lighten up their
pressure on the pedal in these situations. I would suggest that the best thing to do is go to a Workshop or Service Center and have it checked out. Please remember to put a good rating on my profile.
Kind regards
Dustin Ellse
SOURCE: 2001 Toyota Tacoma- turn lights not working and cruise control
fuses???
Check relays.....
Harness grounds, engine ground,
Check the trailer harnes for short.
Vitally
SOURCE: 1979 Mercedes Benz 300D- Turn signals, windows, radio...quit
Barrel fuses used to be made of aluminum and corrode on the copper contacts. Pull fuses and replace. 10-15 dollars now will help get rid of electrical gremlins.
SOURCE: how to turn my bottom fog lights on in mercedes
It's an electrical problem(you knew that)STEP1:check for voltage with a DVOM(voltage tester) at the fog light fuse,if current here switch is good,then problem is after fuse(make sure fuse is good). STEP2:check for power at the fog light ground (the fog light ground is bolt and nut that holds the unit up)if you get power at this end,make sure both light bulbs are good they might be a"series system"like x-mas lights if one burns out the other doesn"t work.
43 views
Usually answered in minutes!
×