The light goes off after I release the brake, but then alternates on and off after that.
SOURCE: parking brake pedal goes to floor
Hello;
The parking brake cables may be stretched and in need of adjustment. Follow the cables along to a nut. Then you can tighten the adjusters up on both sides until you have the proper tension. Also make certain none of the brackets are bent or broken that the cables ride through.
Thanks;
RPM Northwest
SOURCE: BRAKE LIGHTS AND SHIFT INTERLOCK NOT WORKING
Hello Joe...The Aveo has had it shares of problems, and this is one of them....NHTSA issued several bulletins on the 04 Aveo...this following is the one pertaining to the shift interlock.....
Make : CHEVROLET Model : AVEO Year : 2004
Manufacturer : GENERAL MOTORS CORP.
Service Bulletin Num : 070730007 Date of Bulletin: APR 01, 2007
NHTSA Item Number: 10022265
Component: POWER TRAIN:AUTOMATIC TRANSMISSION
Summary:
AUTOMATIC TRANSAXLE/TRANSMISSION SHIFT LEVER MAY NOT SHIFT OUT OF PARK (REPLACE BRAKE TRANSAXLE SHIFT INTERLOCK (BTSI) SOLENOID). *KB
Take that bulletin number to your dealer and see if they can help.
Untill you can get it repaired heres a little tip for getting it out of park....There is a a little hole in front of their gearshift lever that can correct the problem, temporarily. It should say "brake interlock release" or something like that. With car running, put a key-size object into it and push down while moving the lever. It does not damage the transmission, it just releases the lock. (make sure your foot is on the brake)
Now for the brake light issue...do you have power at the switch you replaced? If so go to the relay and check there...if no power there it's probably a bad ground.
Also...you may or may not know, but the timing belts on these Aveos are prone to failure at aprox 50k ...these failures have caused severe engine damage.
Good luck...i hope the information i've provided you find useful.
Please time to rate me.
SOURCE: 2006 Chevy Aveo, can't shift car out of park
You need to replace your BTSI (brake transaxle shift interlock) solenoid. I have replaced MANY and it is the problem 99% of the time. The only other thing it could be is your BTSI fuse so check it first. All you have to do is remove the shifter assembly and install a new BTSI solenoid (couple of screws and two connector terminals) and you will be driving in no time. Hope this helps!!
SOURCE: How do you adjust the Aveo parking brake
take the ruber bot off your e brake and you will see a long treaded with a lock nut and just turn it clock wise .but you will need a long socket 10 mill .turn until satisfide
293 views
Usually answered in minutes!
×