Question about 2001 Isuzu Rodeo

Open Question

Need to see video of 2001 isuzu rodeo 4 cyl DOHC VALVE SPRING COMPRESSOR IN ACTION please!! Anyone?? Replacing valve seats !without wheels until get them In!! Thanks

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 275 Answers

SOURCE: 1999 Isuzu Rodeo LS, 4 wheel drive

it is probably a brake adjustment problem

Posted on Nov 12, 2008

Ad

Anonymous

  • 98 Answers

SOURCE: Just need to know about timing marks, please

when you pop the hood look around you should see a sticker that will tell you

Posted on May 19, 2009

edward80

  • 160 Answers

SOURCE: how to remove starter from 1998 isuzu rodeo 4 whl drive 6 cyl?

disconnect the battery first. remove the 3 bolts connecting the starter the the bellhouseing, the remove the wires. install in reverse order

Posted on Jun 04, 2009

jz auto

  • 202 Answers

SOURCE: timing mark alignment 3.2 dohc isuzu

there should be a dot on either cam shaft and a marking on the belt that line up. http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?chapterTitle=Engine+Mechanical+Components&partName=Engine+Mechanical&pageId=0900c1528002abcd&subChapterTitle=Timing+Belt+Cover%2C+Belt+%26amp%3B+Sprockets&partId=0900c1528002ab6d
hope that helps. one of the easiest cars I've ever timed

Posted on Nov 16, 2009

Anonymous

  • 14 Answers

SOURCE: 2001 Isuzu Rodeo 4 cyl 2.2L 2WD that is overheating

check the electric fan conector plug some times is rusti scratchet whit a sharp scruwdriver remove the rusti or dirt on it this happens many times and step two check the relay and thats it (this is the first step a mecanic to search)

Posted on Feb 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can we fix the heater and defrost in a 2001 Isuzu Rodeo LS without the AC compressor


You may be able to remove compressor and purchase a pulley with an arm that atttaches to the block in place of compressor. Or remove compressor altogether and install a shorter serpentine belt. Hope this has been of some help.

Nov 14, 2013 | 2001 Isuzu Rodeo

1 Answer

2001 Isuzu Rodeo 4 cylinder Check Engine Light


Normally a shop would use a scanner to watch the operation of the EGR valve and sensor.
Code 401 means the sensor is telling the computer the flow is not enough. So the problem could be the sensor rather than the EGR valve. And yes one of the ports could be blocked too.

Jun 28, 2013 | 2001 Isuzu Rodeo

1 Answer

Bent valves cyl 4 & 6 on a 94 isuzu rodeo v6, do i need to pull the engine inorder to repair?


One way or another you have to get the head off to replace the valves. You may have cracked the head by the valves being bent.

Jan 19, 2013 | 1994 Isuzu Rodeo

2 Answers

How are valves removed after cam is removed


You need to take the head off, and you need a valve spring compressor. Basically the valve spring compressor is like a big clamp, as you clamp the spring you will need to be careful as two small collets will fall out. They are small half cone shaped items. When you pull the collets out, slowly release the compressor then take off the top plate and remove the spring/s (sometimes there is a smaller spring inside the bigger spring.). Take off all the springs and then gently remove the valve. Repeat for all other vavles.

One word of caution, grab a piece of cardboard. Say the top ears of a box mark numbers on it. If it is a 4 cyl and only has 2 valves per cylinder. Then you will need to mark it as cyl 1 in ex and then put each valve at the corresponding place. Inlet valve goes under the in mark. Or just get a permanant marker and mark the face of each. This way you won't mix them up.

Oct 04, 2011 | 2001 Isuzu Trooper

2 Answers

2001 Isuzu Rodeo 4 cyl 2.2L 2WD that is overheating


check the electric fan conector plug some times is rusti scratchet whit a sharp scruwdriver remove the rusti or dirt on it this happens many times and step two check the relay and thats it (this is the first step a mecanic to search)

Feb 07, 2010 | 2001 Isuzu Rodeo

1 Answer

I have a 2001 Isuzu Rodeo 4x4 with 3.2 dohc. Transmission is leaking, I brought a oem gasket for the front and back replace the filter. The front pan is still leaking. Try different silicone base gasket...


Yours is leaking from the round side servo cover. A quick fix for someone that knows the correct way to put them in. It is held in by a snap ring and a big spring is underneath it pushing it out. So it must be pressed down to remove and replace the snap ring. A common problem for these vehicles. They will drip on the edge of the pan and make it look like it is leaking.

Oct 07, 2009 | 2001 Isuzu Rodeo

1 Answer

Just need to know about timing marks, please


when you pop the hood look around you should see a sticker that will tell you

May 19, 2009 | 1998 Isuzu Rodeo

1 Answer

1997 isuzu rodeo


The firing order for a six cylinder is 1-2-3-4-5-6 distributor rotation-clockwise...cylinders 1-3-5 on drivers side...2-4-6 on passenger side

Dec 18, 2008 | 1997 Isuzu Rodeo

1 Answer

98 4 cyl isuzu rodeo timing belt


I looked in my database but can't help with that one.

Nov 20, 2008 | 2001 Isuzu Rodeo

Not finding what you are looking for?
2001 Isuzu Rodeo Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

459 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...