Question about 1992 Isuzu Rodeo

Open Question

1992 Isuzu Rodeo window switch wiring for driver's side window. The window will roll down but not back up. The rocker switch makes contact one way (down direction) but not the other (Up direction).

Posted by on

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Richie_asg1

Richard Perkins

  • 1036 Answers

SOURCE: 1992 Isuzu Rodeo Distributor wires 3.1L engine

Hi,
Isuzu seem to have complicated things by changing engines, firing orders and even direction of rotation! As you can see, they've numbered the cylinders the other way than the 3.2L.

The Firing sequence for the 3.1 (traditional distributor) 6 cylinder is as follows -

d6e5b2a.jpg

If you take the distributor cap off, there should be a "No.1" formed on the inside. Stick a lead on this before you put the cap back on and go from there.
As leads are different lengths, you may have to swap a few to find the best fit.

I think 2 of them will look out of place - but that's the way it's designed. Just make use of clips for holding them neatly.

Thanks for using Fixya.









Posted on Jul 06, 2008

Ad

Anonymous

  • 55 Answers

SOURCE: power windows

This means you need to head to the junk yard and replace the unit that controlls all the windows from the drivers seat. Very simple fix. Good luck

Posted on Dec 30, 2008

honeymokey

honeymokey

  • 3113 Answers

SOURCE: isuzu rodeo power windows 1999

window regulator broke

Posted on Jan 06, 2009

Anonymous

  • 3 Answers

SOURCE: power windows isuzu rodeo 1999

Cable must of disconnected need to take door cover off and reconnect...

Posted on Jan 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear passenger window will not go up or down


weak window motor ,,have it replaced

Oct 23, 2013 | Isuzu Cars & Trucks

1 Answer

Need wiring diagram for 1992 Izuzu Rodeo 6 cyclinder.


For the 1992 Isuzu Rodeo 3.1L V6:
Firing Order
:

1-2-3-4-5-6
Cylinders:
.....(back)
5...............6
3...............4
1...............2
Distributor:
.....(back)
..............(+)-screw
.........4
..3
...................5
2
.................6
........1
(+)-screw
.....(front)
Rotation: Clockwise

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Aug 18, 2010 | 1992 Isuzu Rodeo

1 Answer

2000 rodeo drivers side electric window goes up but not down?


pull the control switch out n clean contacts or try and spay contact cleaner on them

Jun 13, 2009 | 2001 Isuzu Rodeo

1 Answer

I have a 2001 rodeo. the power windows all work from each window if you hit that particular switch at the window, they work. the drivers side window also rolls down. but the 3 other switches at the drivers...


First check your fuse panel. Other than that...Perhaps moisture has gotten in the door panel and messed with the connection. I would take the panel off and investigate..make sure everything is plugged in.

Mar 14, 2009 | 1997 Isuzu Rodeo

1 Answer

Power windows isuzu rodeo 1999


Cable must of disconnected need to take door cover off and reconnect...

Dec 30, 2008 | 1997 Isuzu Rodeo

1 Answer

Power windows


This means you need to head to the junk yard and replace the unit that controlls all the windows from the drivers seat. Very simple fix. Good luck

Dec 30, 2008 | 1997 Isuzu Rodeo

2 Answers

2001 isuzu rodeo driver side window is stuck down?


pullswitch drivers side power up brown and white and ground blue and red use jumper wires

Nov 26, 2008 | 2001 Isuzu Rodeo

1 Answer

Isuzu Rodeo w/3.1L engine


Front Passenger side on cap is 1 - if you look on the inside of your cap there SHOULD be a pin marked with a 1, and the plugs go CLOCKWISE not counter. Just had the same problem myself with my 91 Rodeo. Cylinders are as follows Passenger side (front to back) 1 - 3 - 5, Driver side (front to back) 2 - 4 - 6. I called the Isuzu dealer and they told me it was counter clockwise, but when I hooked it up that way it backfired through the Carb.

Jul 05, 2008 | 1992 Isuzu Rodeo

Not finding what you are looking for?
1992 Isuzu Rodeo Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

459 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...