Please Supply me the Torque Settings for The Flywheel Bolts on a FORD RANGER V-Power 3.0 TDCi 2010/17
The service and repair manual will give you all the knowledge you want to fix the problem on your own and you will get the manual from the given link http://toolsnyou.com/
SOURCE: Flywheel bolts torque settings
Check with your local auto parts store. Or buy a repair manual
SOURCE: Torque spec for flywheel bolt: Isuzu 2.5 diesel engine
normally 110 nueton metres. use nut lock and once you have torqued you will feel if you have to tighten it a bit more.
SOURCE: torque specifications for 1998 ford ranger
Okay...here is a list since no motor size:
2.5L----- 56-64
3.0L----- 56-64
4.0L----- 59
5.0L----- 75-85
All in ft lbs.......this is for the flywheel.
SOURCE: what are the torque specs on the flywheel bolts
well is this a stick or rring gear any way if this is a stick 60 foot lbs left of car you start center is one then the top would be six and the bottom one is 3 right sude is center is two upper is five and lower is four this is toq patern hope this helps redoil
662 views
Usually answered in minutes!
×