Only the back the front light and blinker is working
So your taillights should have 2 bulbs in them. 1 that turns on when you turn your lights on and stays on until you turn them off. That same bulb should have a 2nd circuit that lights up when you press on your brakes. The 2nd bulb appears when your reverse gear is engaged. So if you have no lights on right you have to replace both bulbs and if you have no brake light on the left you just have to replace your rear brake light bulb.
Guys/Girls the issue was a human one. The young very young gentleman at Advanced Auto helped me put the new brake lights in but he put or we put the reverse lights in the brake light socket. I went and looked at the bulb we put in yesterday and SOB It had one light instead of the two lights in one bulb. I thought is it really that and yes it was. Thank you all for the help. I mean that not just saying it.
Brake lights could be brake pedal switch. Tail light and blinker could be bad bulb.
SOURCE: Right tail light not working when pressing brake w/ lights on.
There should be at least 2 bulbs in the light assembly. One light is the light that is on when you turn on your headlights with out the brake pressed, the other light only lights up while you press on the brake. Make sure you are replacing the correct bulb. You may have been replacing the bulb that stays on. Your lights may be set up to turn off the light that stays on when the headlights are on while pressing the brakes.
SOURCE: 89 Chevrolet K1500 tail light issues
change the brake light switch ,or rewire the whole lot to europeon standard where its all seperate.Stupid american idea where the brake light is used as the indicator as well.Had a few like this to import and had to rewire the whole rear back lights as their is some fancy brake light switch on these cars with a whole lot of wires .i just cut the whole bunch and rewired the lot as our regulations do not permit this type of concoction.best of british with it though as although its not difficult to do its amazing how many so called mechanics run when they more than two wires
SOURCE: Tail lights but no blinkers or brake lights
there are two turn signal flashers under dash one on fuse box and one next to the light switch have to look up behind dash behind light switch for second I had same problem
SOURCE: NO LEFT SIDE TAIL ,STOP OR BLINKER REAR LEFTLIGHT
did you try to replace the bulb in the back normally when it blinks fast like that its just the bulb and its doulbe film thats why the brake and blinker dont work
284 views
Usually answered in minutes!
So to clarify- what lights do not work?
All rear lights on the right and only the brakes on the left?
Sorry for the confusion. The reverse lights are not installed yet. All other lights work except the back Tail lights which are in the same brand new bulb of the brake lights. I’m gonna get the reverse lights and see if that’s the issue. I’ll update later.
Issue fixed. Wrong brake lights were installed.
×