SOURCE: how to replace the light bulb on exterior mirror 2003 ford expedition
The one with the turnsignal intergrated into it?
If so.....
Push the Mirror FORWARD, up close to the pivot poit there is a small torx head screw - unscrew that.
At the tapered end carefully pull/pry down. That end has a small metal spring clip that holds it up, be careful with it, if it snaps, you can NOT by a new one...
SOURCE: 2003 ford expedition has service engine light on
It does not take 3 hours to change spark plugs..I will suggest you get the right equipment to do this job.Get the right tool that can sit on the spark plug and unscrew....You will need to disconnect the coil pack that sits on top and disconnect the wires if needed.From there it is self explanatory.
SOURCE: 2003 ford expedition tail turn signal light dont
You say the rear tail turn signals are not working are the fronts working? If the fronts work and the rears don't then you have a wire issue. Check the grounds for the tail lights or check and see if a trailer wire harness was put in by splicing the wires. Also check for brake lights and see if they work should be same bulb. If the fronts do not work either check fuse 18 in the fuse box should be a 10 amp or check brake fuse 2 which is a 20 amp
219 views
Usually answered in minutes!
×