Question about Ford Edge
14-16 lbs. torque Torque the inner bolts first and work out to the front and rear bolts last.
Posted on Dec 20, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 02 Chevy avalanche 1500 need
1st pass 44 inch lbs
2nd pass 71 inch lbs, check the manifold joints for shifting and fix if needed
3rd pass 106 inch lbs
4th pass 11 ft-lbs
Start in the center and tighten in a criss-cross pattern.
Posted on Nov 27, 2010
INTAKE MANIFOLD (sequence below)
STEP1........66"l bs. STEP2........21' lbs.
FLEX PLATE BOLTS
FLEX PLATE to CONVERTOR
Locktite on all the bolts.
I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867
Posted on Oct 23, 2011
start in the middle and alternate left to right and the torque on a alloy manifold will be around 14lbs or a nip with a 3/8th drive rachet ,any water passages use contact adhesive around the water ports .
Posted on May 26, 2012
Testimonial: "Thank you for the help......appreciate it"
Tips for a great answer:
Dec 21, 2015 | 1998 Ford Windstar
Dec 11, 2014 | 2000 Ford Taurus
Tighten the vertical lower intake manifold bolts (the four middle ones) to 7 Nm (62 lb in). Tighten the diagonal lower intake manifold bolts (two on each end) to7 Nm (62 lb in). Tighten the vertical lower intake manifold bolts (the four middle ones) to 13 Nm (115 lb in). Tighten the diagonal lower intake manifold bolts (two on each end) to 25 Nm (18 lb ft).
Oct 11, 2013 | Cars & Trucks
Sep 19, 2013 | 1996 Saturn SL
May 25, 2012 | Chevrolet Corsica Cars & Trucks
Dec 22, 2010 | 2004 Hyundai Elantra
Oct 02, 2010 | 2003 Ford F150 Regular Cab
May 07, 2010 | 2001 Jeep Cherokee
May 19, 2009 | 1997 Buick LeSabre
872 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: