New battery may need to be coded to the vehicle.
Assuming no one has played with the wiring the next step is the starter itself, but do this first park it so you can see the headlights like against a garage door then turn the lights on and try to start if the lights dim and you may hear a click the starter is bad, if not move the shifter to neutral then try to start again if it starts the neutral safety switch is bad, ignition switches are a bit tougher to troubleshoot and require a test lite and DVOM. If you're up to it let me know here and I'll take you through it. I hope this helps, take care.
SOURCE: 2002 Ford Escape will not shift into drive
This is the shift lock...you will need battery to release it electrically but there is an over ride by the shifter..either a button to push or a place to put your ignition key. This will release the shifter
SOURCE: 2008 Ford Escape oil change message
to reset the oil monitoring system to 100% , press SET control to access the system check functions , press and release the SET control to display OIL CHNG XXX% HOLD SET NEW , press and hold the SET control for 2 seconds to display OIL CHANGE SET TO 100% , oil life is now reset . thank you !
SOURCE: 2004 Ford Escape Electrical problem
This is a problem with the alternator. Diode rectifiers and voltage regulator replacement will give this baby a 14.2 voltage output. In this 3L V6 SUV removal of the alternator requires removing the right tire, the right axis and undercovering to reach the 6G alternator. It is a 133mm rectifier with a motorcraft, The serpentine belt is better removed from the bottom. Also keep a bucket on hand to recover the oil from the transmission.
SOURCE: ABS & traction control just went out on 2008 Ford Escape.
Chances are it is a bad ABS sensor. Need to get scanned to know for sure and which one.
Not much i know but I hope that helps.
95 views
Usually answered in minutes!
×