My blower is not working on my 2010 Chrysler Sebring. I have replaced the blower motor and checked the fuses. Where do I go from here?

SOURCE: milage odometer on 1997 Chrysler Sebring doesn't work

i got a better way you to fix it http://members.cox.net/dpeters30/97_sebring_dash.htm it free if you know how to solder. It works I did it this june and it still works

SOURCE: 1998 Chrysler Sebring JXI Convertible Blower Motor Not Working

Sounds like it in the switch or the electrical plug at the switch.The electrical plug could be burnt and need repairing or replacing. Need to remove the dash fascia, Careful not to damage clips. If the cover has no visible screws or bolts, then it clips into place. Unbolt heater controls and pull contol forward. Not a fun job but with patience you should be ok.

SOURCE: need to replace blower fan

i assume you are talking about for the ac/heater
it will be under the dash on the passenger side
i would suggest buying a haynes book for this you can get them at places like autozone for around 15 bucks
its a easy task just be careful taking off the fan blade and dont brake it

SOURCE: 2003 Chrysler Sebring fan speed

You need to replace the blower motor resistor...

SOURCE: blower motor does not work

I had the same problem, replace, replace, replace. Check, check and recheck. What I found was the blower motor resistor, located in the blower squirrel cage area, two prongs and a curly wire, was bad. Took the new one back, (it ohmed out okay, continuity ok, all ok!) replaced it with another, and Bingo, problem solved. Frustrating to say the least. After two relays and a blower switch, and test, test and retest. It was a faulty resistor. Made in Mexico. And no guarentee, even though new, it works. Trial and error. Even the dealer parts are Honcho en Mexico. Thanks NAFTA. You gonna make us all welfare babies.