I hear strange noise from engine when I accelerate uphill like its going to stall or off and recently found oil at 4 pointsmaybe sparkplug position on the cylinder plastic cover
SOURCE: peugeot 406 coupe gear oil change
The oil filler neck is at the top of the engine, on the cam cover towards the RH side as you face the engine.
SOURCE: how to change the spark plugs on peugeot 406 v6 3l
1. Spark plugs removal
1.1. Front cylinder bank spark plugs removal:
1.1.1. Disconnect the battery from car terminals.
1.1.2. Remove the engine plastic cover.
1.1.3. Disconnect the ignition coils electrical supply cable and all three coils connectors.
1.1.4. Remove all three ignition coils screws.
1.1.5. Remove all three ignition coils out from cylinder head.
1.1.6. Remove all three spark plugs out from cylinder head (straight forward).
1.2. Back cylinder head bank spark plugs removal:
1.2.1. Remove the inlet manifold out from cylinder head.
1.2.2. Disconnect all three ignition coils connectors.
1.2.3. Remove all three ignition coils screws.
1.2.4. Remove all three ignition coils out from cylinder head.
1.2.5. Remove all three spark plugs out from cylinder head (straight forward).
2. Spark plugs installation
2.1. Refit all in reverse order.
2.2. Spark plugs tightening torque = 2,8 +/- 0,3 daN.m
2.3. Ignition coils tightening torque = 0,8 +/- 0,2 daN.m
Testimonial: "cheers"
55 views
Usually answered in minutes!
×