SOURCE: 2008 Toyota Tacoma Excessive brake pedal
Your dealer is not lying to you.
All of the Toyota product line with ABS has this phenomenon. What Toyota has done is incorporate "Brake Force Distribution" into the braking system. What that means is there is now a sensor on the brake pedal/brake rod, going to the master cylinder. The sensor measures how FAST you press on the brake pedal. This activates the ABS pump, and supplies more brake fluid, harder, to reduce the time needed, such as a "panic stop"; the pedal travel is much longer than you are used to, because of the way they have to measure the speed of the rod being depressed. In actuality, this system is much better than the old system, as it also prevents wheel drag. It just takes a while to get used to. Really, there is nothing to worry about, I explain this same thing to my customers every week.
I hope this helps you out.
Thanks for choosing FixYa for assistance.
SOURCE: bleeding the brakes on a 2008 toyota tacoma
u may need help on this ok u need some one to pump the brake hard and fast 10 or more times but first on ur brake callber there should be a bleeder that u can losein or tighin the size of soket u should need is a 3/8 ok have someone to pump them brakes 10 or more time then hold it in as u losein the bleeder the peddle should go to the floor they will need to hold that peddle in as u tighin the bleeder then pump the brakes repeat this 5 or more times then do the same on the other side remember to keep brake fluid in the mastercylender or ur defeting ur self
SOURCE: brake light wiring diagram for 2008 Saab 9-3
easy
alldata.com login and read.
or the FSM,
factory service manual, omg, what is a SAAB, a disease?
if i and one , it shoot it. like a sick horse.
545 views
Usually answered in minutes!
×