Hi there's this website something like reliable-store and it is very amazing for manual for repairing servicing anything
someone on fixya recommended it to me and I thank him even today
They have full manuals and it's verrrrry c heap and mine
I got free in offers
3rd time I bought it, I also had an issue with the file so the girl replaced it in 30 mins
there is one website more but i don't remember its name it was 2 years back bitman something link this
Try these out brother
SOURCE: 2000 Dodge Caravan wont start
sounds like engine is hydrolocked (cylinders full of water)
not good
SOURCE: 2000 vw beetle went to start car and battery
Take to dealer. Vehicle needs vag-com to be reprogrammed. Bring all keys with you to dealer.
SOURCE: 2006 dodge grand caravan-car won;t start.
Test at the spark plug if you are getting current there with a cheap spark plug tester, if not, it could be the spark box. ( it used to be an ignition coil on older cars ) double check the computer for codes which may lead to a cam sensor not giving the PCM information.
SOURCE: replacing 2000 dodge caravan timing belt - how do
rotate crankshaft in a clockwise direction until both timing marks are aligned together on both camshaft gears and the crankshaft timing mark aligns with mark on the block just behind the crankshaft gear. you may need to rotate the crankshaft gear several times before you can get all the timing marks to align. once you have done this then insert a allen wrench in the hole on the belt tensioner and a small drill bit or a small allen wrench in the smaller hole. take the largr allen wrench and apply pressure counterclockwise until the small drill bit or allen wrench slides into locking hole to hold the belt tensioner in place. install belt and release the tensioner. (note: before starting work on engine remove the negative cable from battery).
SOURCE: My 2000 Dodge Grand Caravan
Hi, if an engine cranks but refuses to start, it lacks ignition, fuel or compression. When the engine cranks normally but won't start, you need to check ignition, fuel and compression. Ignition is easy enough to check with a spark tester or by positioning a plug wire near a good ground. No spark? The most likely causes would be a failed ignition module, distributor pickup or crankshaft position (CKP) sensor.
84 views
Usually answered in minutes!
×