Need a multi meter and to remove panel to test switch and motor
SOURCE: check engine light
yes and itys a very common problem yu need to change the speed sensor (VSS) on the trans heres how it comes apart 
SOURCE: 97 acura CL ABS light goes on
The ABS light can be on for different reason.
sometimes a bad speed sensor on one of the wheels can trigger the ABS light.
The ABS module, or the entire braking sytem may be faulty, to find out there is need to test the ECU/ABS modules usinga code reader, and to inspect the braking system.
SOURCE: my transmission went on my 97 acura cl....
the average price of that transmission is about $800 rebuilt, try this site and then its up to the mechanic where you take it for the installation charge
SOURCE: how do you know that your water pump on a 97 acura
The only reasons to change it is A: it leaks or B: the bearings are bad, or C: Replace it whenever you replace the timing belt. Dont try this unless you are experienced working on engines and you have the tools and knowledge to replace the timing belt, and water pump.
SOURCE: 97 Acura cl abs light on? What does this mean and
This indicates a problem with the anti-lock brake system, make sure fluid levels are correct, but it is likely that a sensor at one of the wheels has disconnected, causing the light to go on. If you have driven over road debris, snow, ice, etc. something may have damaged a sensor at one of the wheels. Jack up the car and support it to safely go underneath to inspect all 4 wheels at the back sides for damage.
73 views
Usually answered in minutes!
×