Expensive. But you csan do it yourself. First remove the door panel, purchase the regulator on line, after removing the door panel you will see three star scres holding in the window motor. Remove this, take it apart and check the plastic plugs, if worn replace with ball bearings, if goo pack with plenty of bearing grease. Now you will see aluminum holding the regulator on. Using a 1/4 punch and a hammer punch out the rivits, then using 1/4 drill bit , drill out the aluminum, if you must remove the glass first remove the rollers holding in the glass, they pop out with a screw driver. Replace the aluminum which was holding the glass with 1/4 scrwws and bolts. Takes about 4 hours. If one is going bak all will go bad eventually, had to replace all 4 on mine.
206 views
Usually answered in minutes!
×