My jeep cherokee automatic runs in drive but its not packing the gears on its own it seems its in one gear

SOURCE: 2000 jeep cherokee transmission problem

this problem exist internally in the transmission, only a computer diag can help resolve your problem

SOURCE: Transmission problem

Hi renjay, is your jeep trans an AW-4 or a 46RH? The simple things to check here without getting to the internals are as follows; check your oil level,filter etc. check the throttle linkage adjustment,check the trans shift adjustment also have the TCM tested, the TCM (transmission control module) used with the AW-4 has a self diagnostic program compatible with the DRB II scan tool.The tester will identify faults in the electrical control system it will help determine if the problem is electrical or mechanical, after this it tends to become internal and we can adress that issue if it arises,hope this helps,good luck and let me know how you make out or drop me a line if you have any questions,take care

SOURCE: No reverse

the trans needs to come out and be rebuilt

Jerry Koski

• 443 Answers
• Posted on Apr 27, 2009

SOURCE: Automatic gearbox takes a long time before it will change gears

Have you serviced your transmission latley ? like filter and fluid change ? just a thought .. first thing I would do . then go from there. Jerry

SOURCE: Transmission Troubleshooting 1992 Jeep Cherokee

Check the trans fluid level first. To do this have the car running at operating temp check the level if low adjust to proper level and recheck. If thats not it I will help u trouble shoot it further. Sounds like a bad torque converter.