Where are the timing marks for a 03 lancer es

there is a u tube video for that car how to set time on that car and how to replace timing belt

the marks on the cam shafts are directly vertical at the top in line with a mark in the back of the housing the balance shaft timing mark is at 9 oclock position
the crank shaft timing mark is at 10 oclock position ( lining up with a pointer) and the oil pump mark is also at the 10 oc;ock position lining up with a pointer
( to check the position of the oil pump sprocket remove a plug -shown in the book -and insert .30dia pointed screw driver (5/16 philips ) to at least 2.4 "
if it cannot be inserted to this depth move the oil pump sprocket until it can)
the process of assembly is -:
install the timing belt to the sprockets and pulleys in the following order , retaining the belt to the camshaft sprockets by the use of suitable binding clips ( clothes pegs etc)
crankshaft sprocket
oil pump sprocket
guide pulley
exhaust camshaft sprocket
intake camshaft sprocket
tension pulley
to help install the belt the auto tensioner on the lh side should be removed
all of this information will be included in a workshop manual covering lancer engines for the years listed and will also include all tensions for the bolts --If you do not have the workshop manual then it is STRONGLY recommended that you obtain one
information from autodata belt installation manual lancer 2.0 l
2003-2007 engines

Mini marks on gears where the belt goes look at the grooves those are it only one groove per gear.

Maybe the timing belt it's out of timing. Check video.

If you want this fixed seriously because mine was doing the same thing and people kept getting me to buy all this **** i didnt need for my 03 lancer es and all i did was unplugged the MAF (mass air flow sensor) and it was perfect all over again. I was pretty upset figering this out yesterday. Just unplug it and turn your car over and let it idle a min. If all symptoms go away buy a new MAF sensor from a parts dealer for like a buck eighty.

where is the blinker/hazard relay on an 03 mitsu lancer es

Click on the following direct Link. It has the Tining Belt Diagrams that will match your specific engine.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2004/make/mitsubishi/model/lancer/2004_mitsubishi_lancer_timing_belt_diagram_marks.htm

Unless you have the equipment necessary to effect this major repair, get your mechanic to do it.

try putting on a thicker rubber seat for your coil springs to add height. hope this helps

I bought a viper and I love it and its one of the best alarms. you can find some that are after market for cheap at least 200 bucks or less. but good luck they are not easy to install.