SOURCE: i need a 2002 ford ranger fuse box diagram and afuel pump relay switch diagram
Hi
go to www.motorcraftservice.com then click on the owner guide and put in your truck information
then choose the 1st owner manual printing and should be between page # 184 to 200.
Good luck and I hope this will awnser your question.
SOURCE: fuel pump on my 1987 ford ranger has no power
There is a Fuel Pump relay. Not sure if Ford has a Relay Box under the Hood though. There are also Fuses that Control some items of the Fuel System. Try the Relays first and see what you have.
SOURCE: 2005 ford ranger fuel pump relay gets hot and engine dies
Like Laurie Mack said. It is the inertia switch below the glove box. Here is some funny information. DON'T change the fuel pump first. Interesting fact: I bought the new inertia switch from Ford and the install instructions that came with it said to install the switch in the protected area to the right where the fuses are. It is like Ford knows it was a dumb place to put the inertia switch, but they won't let you know until after you buy a new one. I have read at least 20 other people on here that had the same problem I just had.
SOURCE: need to find fuel cutoff inertia switch in a 1996
it is locate under dash board. a little to the right of center it is about 3/4 inch by 1inch is proably red or orange with a push button on one side. push the button
In your power distribution box in your engine compartment (Ford recommends
disconnecting your battery before servicing fuses / relays in PD BOX )
fuse # 9 - 20 amp mini-fuse for fuel pump relay and RAP module
relay # 5 - is the fuel pump relay in your PD BOX
also , the fuel pump inertia (shut off) switch is in the right front passengers
footwell by the right front kick panel.
Thanks..
7,431 views
Usually answered in minutes!
×