At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If the 4WD service light comes on when you start your Hummer H2, it could indicate a problem with the four-wheel drive system. This warning light could indicate a problem with the transfer case, the drive shaft, the front or rear differential, or other components of the 4WD system.
It is recommended to take your vehicle to a certified mechanic or a Hummer dealership for proper diagnosis and repair. The service light coming on could be a sign of a serious problem, and it is important to address it promptly to avoid further damage to your vehicle and ensure safe operation.
Well it could be the selector switch, but I doubt it. Generally, the service light means something is not working that the computer controls. Solenoids and valves are a couple of possibilities. The transfer case is shifted by solenoids commanded by the body computer based on the switch position on the dash. You should be able to have a shop scan the body computer for trouble codes and proceed from there. A basic code reader may not access the body computer.
If all the lights are out then the 4wd switch is bad but,if it won't come out of 4wd-low then the 4wd actuator is bad or stuck.The 4wd actuator is what engages the differential from 2wd to 4wd.HOPE THIS HELPS!!!
It is probably the encoder motor attached to the transfere case. look under the vehicle to see if there is signs of corrosion between the encoder motor and transfere case.
the switch is probably from a newer modle truck, although they work the indicator lights don't always work, and check the 4x4 fuse in the fuse panel on the left side of the dash by the drivers door
Use the Owner's Manual to manually go into neutral and reset to 2WD HI. But then look under the hood check the fuses or look for wiring that may have come unplugged.
Does the 4-wheel drive work ? Most of the time, it is a reminder to have your fluid changed. Other times, it could be a vacuum leak in the line that engages the 4-wheel drive. Check both of those first.
×