Wiring schematics for a 97 s10

Partial wiring diagrams are usually available, but if you want a full wiring schematic, you need a workshop manual or a subscription to a website.

https://www.justanswer.com/chevy/2iqt1-color-code-ignition-module-1988-chev-s10.html

https://www.google.com/search?q=1987+Chevy+S10+2.8+spark+module+color+code+wiring+diagram

..

Wiring diagram is available in the back of a Hanes repair manual. Most Auto Zone stores or you can go to the dealership parts department and ask to look at one and they may print it for you.

you'll have to change the whole wiring harness an the computer .

They will bolt up. You may want to get the wiring plugs off the 97 t case as they will be different from yours. Or use your old t case

your power starts at the brake light fuse,check with a test light,then proceed to stop light switch on brake pedal under dash,one wire will be hot when when you check it with your test light, the other won't be until you press down the brake pedal then the power flows through to the second wire,if no power to second wire replace switch,if you have power remove tail light bulbs and check for power in side socket.

You need either the service manual or go to Alldatadiy.com for wiring schematics.

check fuel pump relay first and yes it will

no it won't differnt computers with differnt plugs, and no you can't use the 97 computer, because the engine won't run right

Ask the schematic finding experts -
They will get it for you.

http://manualfox.com