Two ideas here, in the under hood fuse box or under the bumper.
https://www.google.com/search?q=1998+Acura+CL.+Where+is+the+a%2Fc+clutch+relay+located
..
SOURCE: Find oil filter in engine of acura CL
back side of block under intake if its a 2.2 or a 2.3 if its a 3.0 its on the passenger side of engine bay if you turn the wheel you will be looking at it
SOURCE: transmission dipstick location
Sorry, I'm just now getting it to you. The dipstick is located on the passenger side of the car way down at the bottom. It should have a yellow handle. It's just to the right and down of the battery. Let me know if you can't find it still and I will get you a picture somehow.
SOURCE: 1998 Acura CL Radio Code need...
You Would have to get in Contact with the dealer and ask them for the information with the same you provided here they can help if its just the code there should not be a charge but every dealer is different. If you feel you can also call acura main number @Acura Toll free: 800-382-2238. Fax: 310-783-3535. Website: www.acura.com. I hoped that helped.
SOURCE: how to locate the thermostat for a 1997 acura 2.2
Removal & Installation
If the hose is stuck, carefully use a pick to break the seal between the radiator hose and the housing. If the hose is deteriorated, replace it with a new one.
Remove the thermostat housing bolts
Pull the water outlet neck away from the housing
Note the installed position of the thermostat, then remove it
Some coolant may leak out of the housing as the seal is broken.
Many thermostat housing's are made out of aluminum alloy. A plastic scraper is very effective and will not harm such metals.
To install
A new gasket must be installed before installation
Install the thermostat with the air bleed valve at the top
Install the thermostat with the jiggle pin facing up. This acts as an air bleed and must be at the top of the thermostat to operate properly.
Testimonial: "thank you very much on the solution, didn't take as long as i expected!"
SOURCE: how to install a clutch on acura CL
Plenty to mention. Best way is to get the Hanyes Repair manual-sold for around $20, with plenty of stuff in it. A few things:
Disconnect battery.
Take off starter-motor.
Remove brake calipers, and tie them to struts.
Remove front tires.
Disconnect clutch master-cylinder
Jack up the car and support it on jack-stands.
Unbolt the clutch-housing from the engine, drag it out.
Installation is reverse of removal.
Testimonial: "Thanks! This should help"
123 views
Usually answered in minutes!
×